RDA Vengeance RDA, any good builds yet?

[BeerGolfClouds]

I picked up a Cloud Cig clone from 101vape to give this rda a shot, if I like it I'll probably go authentic soon. But so far the jury is out. To this point I've tried quads using twisted 28ga, quads using 26ga, and have settled on duals using the twisted 28 running at .4 ohm, rayon wick. I've run it on both my iPV3 and a few mechs.

Wicking in quad coil mode is a pain. You can go under the coil legs or around the posts into the well, and it seems like the tails need to be thinned out way too much. Lots of wick to stuff in there. In dual coil mode, wicking around the posts is no problem.

I'm using the delrin drip cap, and it vapes pretty well, with decent airflow. My biggest gripe about this particular clone model is that there's a really fine line between having loose contacts and snapping the wires. Hopefully smoothing out the screws will help.

Anyone else pick up a Vengeance yet? Have you made a build that's got you loving it? Please share, I need ideas It's a 50/50 on making it into my rotation.

 

[Pensilac]

I've been using mine for around 2 weeks or so and have been loving it. I tried a quad 26 gauge build first but it was way too hot for me so I've settled on my tried and true dual 5 wraps of 24 gauge and am getting nice vapor and awesome flavor from it. I've been wicking around the posts as well and have had no problems with it in dual coil, was a little more fidgety with quad coils but wasn't as bad as I thought it'd be.

Mine was made by "Cig Cloud" by the way.

 

[BeerGolfClouds]

What size coils are you using? The dual 5 wrap 24 at 3mm is my go-to Stillare build. I'll have to give that a shot.

 

[Pensilac]

They're at 2.4mm right now. The quad coil build I tried was at 3mm.

 

[BeerGolfClouds]

I revisited this RDA again yesterday, and decided to try a build using 26ga stove top coils. Now we're getting somewhere! The wick is all in the interior, so there's nothing to block the airholes or to cause potential leakage. And the flavor is awesome with the air running vertically up the stove tops. I think I'll leave this build in for a while.