we will keep the tube prices low like we have always done, not many if ANY one else other then us has extra tubes of the vision line, we have tubes for every vision on the site except the micro tubes which i have here and will add to the list
- Status
Bad, save me some wire, wick and glue for my next order. I am getting the Stone IIIs and Stardusts, when the new colors arrive. If the C8 will be in this week, I will make sure to get about 5 of those ('cause you can't rip apart all 5).
timothy, later this week for vision ego stardust tubes, i meant in general we have all the tubes of revery vision we sell, excpet for now grande which have shipped and stone 3 which ill get for as well, but we have tubes for nano, micro,360 regular, mini, giants and in colors for those too which ill put up and much more coming.
we are the originators of the vision line and the vision line will expand greatly
we are the originators of the vision line and the vision line will expand greatly
Shucks, already placed my order and didn't see this until now. Still looking forward to finally giving them a try
wait! your planning on more products for the vision line! 
He was going to come out with Vision products named after his favorite forum members, and I was absolutely for it. But, when the Vision Lord and Vision Davon were renamed to the Vision Annoying and Vision Idiot, I could no longer be part of it.
He was going to come out with Vision products named after his favorite forum members, and I was absolutely for it. But, when the Vision Lord and Vision Davon were renamed to the Vision Annoying and Vision Idiot, I could no longer be part of it.
I dunno.
The zoiDic Vision has a certain Ring to it.
Um... Please forgive me if this is a stupid question, I've been a bit out of the loop lately - sometimes non-vaping stuff interferes with my real life.
But, about the Stardust replacement tubes - do we still have to use heavy industrial equipment to get the tube off in the first place, or are the new-and-improved-cone-headed ones easier to disassemble?
But, about the Stardust replacement tubes - do we still have to use heavy industrial equipment to get the tube off in the first place, or are the new-and-improved-cone-headed ones easier to disassemble?
Um... Please forgive me if this is a stupid question, I've been a bit out of the loop lately - sometimes non-vaping stuff interferes with my real life.
But, about the Stardust replacement tubes - do we still have to use heavy industrial equipment to get the tube off in the first place, or are the new-and-improved-cone-headed ones easier to disassemble?
They can be taken apart by removing the silver ring with pliers. I couldn't just rock them off like the first batch.
Only tried with one of the newer ones so far.
Um... Please forgive me if this is a stupid question, I've been a bit out of the loop lately - sometimes non-vaping stuff interferes with my real life.
But, about the Stardust replacement tubes - do we still have to use heavy industrial equipment to get the tube off in the first place, or are the new-and-improved-cone-headed ones easier to disassemble?
Have you watched the Vids that RocknRobbieSF has put out?
They are quite Good.
I just tried the ring removal thing yesterday. 3 letters should sum it up pretty well.
WTH!
Man... I swear Mr. Murphy must be living in my attic or something. LOL On the first one I broke the tube off along the top of the metal ring. No biggy as this one was starting to leak a little from the fractures it had from day one.
But then I tried it on my sons which didn't have any cracks and I just about popped a vein in my head trying to get the damn thing off. Before I broke the tube I gave up and just pressed it out like I've been doing. Even after I had removed it from the connector I still couldn't get the thing to come off.
I so wanted this to work because I'm getting tired of using industrial tools and jack hammers to simply clean and/or re-coil these little boogers. But in all fairness, I'm thankful that we can get them apart some how.
I might try a heat gun on the next one to see if that would help. I know that as soon as I get one off then it should be easier taking it apart after that. But man... what a PITA so far.
I think RR has the magic touch or sumthin. LOL He did the same thing on the first release video where he just had to look at it funny and it fell off for him.
WTH!
Man... I swear Mr. Murphy must be living in my attic or something. LOL On the first one I broke the tube off along the top of the metal ring. No biggy as this one was starting to leak a little from the fractures it had from day one.
But then I tried it on my sons which didn't have any cracks and I just about popped a vein in my head trying to get the damn thing off. Before I broke the tube I gave up and just pressed it out like I've been doing. Even after I had removed it from the connector I still couldn't get the thing to come off.
I so wanted this to work because I'm getting tired of using industrial tools and jack hammers to simply clean and/or re-coil these little boogers. But in all fairness, I'm thankful that we can get them apart some how.
I might try a heat gun on the next one to see if that would help. I know that as soon as I get one off then it should be easier taking it apart after that. But man... what a PITA so far.
I think RR has the magic touch or sumthin. LOL He did the same thing on the first release video where he just had to look at it funny and it fell off for him.
I just tried the ring removal thing yesterday. 3 letters should sum it up pretty well.
WTH!
Man... I swear Mr. Murphy must be living in my attic or something. LOL On the first one I broke the tube off along the top of the metal ring. No biggy as this one was starting to leak a little from the fractures it had from day one.
But then I tried it on my sons which didn't have any cracks and I just about popped a vein in my head trying to get the damn thing off. Before I broke the tube I gave up and just pressed it out like I've been doing. Even after I had removed it from the connector I still couldn't get the thing to come off.
I so wanted this to work because I'm getting tired of using industrial tools and jack hammers to simply clean and/or re-coil these little boogers. But in all fairness, I'm thankful that we can get them apart some how.
I might try a heat gun on the next one to see if that would help. I know that as soon as I get one off then it should be easier taking it apart after that. But man... what a PITA so far.
I think RR has the magic touch or sumthin. LOL He did the same thing on the first release video where he just had to look at it funny and it fell off for him.
Maybe it's time to try the Tried and True Method?
If that doesn't, just use the Hammer to Smash the Hell Out of It in the Backyard.
Thank you. I was hopping to get one of those with the Vision Stone Tank 3 to save shipping, but I don't know if they'll be out of stock when the Stardusts arrive
- Status
Similar threads
- Locked
- Locked
