Vision Spinner 2's AMP LIMIT, anyone??

[DoctorBuzz]

What is the limit on this beautiful 1600 mAh device?

Can anyone tell me how a 1.5 ohm coil works at the upper end of the VV range. Does the 4.8 V setting work consistently without issues??

Thanks!

 

[Ogmudbones]

It can fire 1.5's through its entire range though i dont recomend it unless your using a rebuildable or rebuilt singe coil heads...those kanger duals will burn juice in a heartbeat

 

[Baditude]

You don't really want to fire a 1.5 ohm coil above 3.6 volts. You'll be more likely to burn either your coil out or burn your juice.

Either use the below chart, or use the Ohm Plus Two Formula. Whatever the resistance of your coil, add the number "2", and the sum will be a starting spot in voltage. Ie: 2 ohm + 2 = 4 volts.

 

[TheRac25]

that chart seems ok for 32 gauge single coils i guess

 

[GaG8tor]

Bad. Your knowledge and willingness to share and put the information out there is so greatly appreciated. Jus sayin'

Sent from my SCH-I535 using Tapatalk

 

[MrPlink]

that chart seems ok for 32 gauge single coils i guess

Exactly. It might make some sense for carto and clearomizer users, but it is otherwise highly outdated and practically misinformation at this point.

Frankly I dont think it was ever of any value.
If it taste burnt, turn it down!

 

[nttdemented]

I think no one will know until they put an inline meter on one. I did that to the Kanger EVOD VV 1600mah that comes with the EMOW Mega kit and I got a 2.5amp limit. Good for a max of 9.5watts on a 1.5ohm coil. I thought it was going to have at least a 3amp limit. Not saying this would directly correlate to the Vision Spinner 2's but this is the closest thing I've been able to test myself.