Any opinions on these compared to Protanks,glass or poly?Will these fit on Vamo,Vmax?TIA
Last edited:
- Status
Hi dale1962
If you scroll through the reviews on the DV site it appears they do fit the Vamo.
Vision Victory
see review #4
I have not used them, so I cannot speak from personal experience, but perhaps some of our other DV regulars have tried them (anyone, anyone....
)
they are plastic but not polycarbonate
they will not fit on a vamo/Vmax without an adapter due to it's shape at the bottom, you'd need an adapter with any mod but they will fit on any ego battery. I personally love them, they use Kanger coils so to me it's a "safer" (in terms of breaking) and "lighter" protank basically. I do not use harsh liquids so the plastic doesn't worry me.
Eric which coils would u use on these the kanger evod/PT or vision 1.8ohm(do these fit evod/PT) u have on site?Any differences?Also the evods u have fit on anything besides ego without adapter I believe saw someone using them on a evic.Free shipping on any specific amount of $$ u spend?Sorry for 20 ??? but any differences in using longer PT coils with longer stem on evods vs shorter ones better or worse (only choice now I quess)?PT2 less airy than PT1?
Thanks alot,Dale
Thanks alot,Dale
Last edited:
which coils would u use on these the kanger evod/PT or vision 1.8ohm(do these fit evod/PT) u have on site?
I only personally use 2.5 ohms or higher on everything but that's just me, if you are asking if the Victory Coils work with the evod protank.. Yes, if you are asking which is better I think it's the protank/evod
Also the evods u have fit on anything besides ego without adapter I believe saw someone using them on a evic.
The eVod is eGo threaded so it only fits on eGo devices natively, everything else would need an adapter,
I do not know what threading the eVic has, not sure if it is ego or not but for mods with a well in the top it would also have to have a well that was wide enough to fit it, I do not have an eVic so I do not know. If it fits in the well and has an ego connection it shouldn't need an adapter, if it is just a 520 then it would need an adapter.
Free shipping on any specific amount of $$ u spend?Sorry for 20 ???
I do not currently have any free shipping options
but any differences in using longer PT coils with longer stem on evods vs shorter ones better or worse (only choice now I quess)?PT2 less airy than PT1?
That's debatable, I do not sense any difference, others do. But I am not really one to ask I vape so many different devices in testing it all gets a blit blurred together for me.
ProTank I and ProTank II use the same base and coils so the airiness would be no different between them
Thanks for all your answers,I have read about alot of this just wanted your point of veiw.Hope I didn't work u to hard
.But as far as the base between the PT1 and PT2 I saw somewhere that the airholes in the base were smaller in PT2.Disregard the email(dalew) as u answered all my ???.Been using Iclear's and VN for awhile now and fairly happy with them but running low on supplies now and thought I would finally look into BCC'S.I know everything has there quirks and must decide if want to try the BCC's now.What really scares me about them is the airy draw and TH.Anyways maybe ordering soon after I decide because u are the least expensive in the states I could find and don't trust fasttech...thanks again,Dale
Last edited:
the kanger coils do not work, and everyone i've tried on 3 different victory tanks they leak, the bottom pin is bigger on the vision atty than the kangers
If you've purchased these from me, Please contact me via email so we can work this out.
The Kanger coils do work on the Victory, I have three I am using myself, it's one of my favorite tanks.
Believe me, if it didn't work, I would certainly not list it.
The screw in sections line up and screw in properly sealing the orings correctly, the base you are referring to (below the connection) fits through the hole and should have no affect on the seal, the sealing is above the bottom connection, the Kanger coils screw in and seal properly onto the Victory.
If your coils are screwing down all the way then the base being .01-.02mm wider should make no difference as it is not involved in the sealing.
Last edited:
i did purchase from you i believe, if not then cignot storefront, so i know they are real. i will try again i guess, it can't hurt. doesn't matter, i just ordered 2 boxes of the victory from you lol. all 3 of my tanks have done this, i will try this again though today.
and leaking may be the wrong term, i get that flooded sound
no worries, thanks, sorry
and leaking may be the wrong term, i get that flooded sound
no worries, thanks, sorry
turns out u were right, maybe the original pro coils are different than the current ones, because i just tried 2 in 2 victory with no issues
- Status
Similar threads
