Vivi Nova V3 cartos

[rocky111]

Both can be used, it all depends on how you make the coils (spacing plays a big part on the ohms)

Which wire to use to get a 3ohm coil? 32 or 36?

 

[jjcordone]

I know why!...Cause my Kit detects the 1.8ohm as 2.2ohms instead...thats why I am quite shocked at it..theres a bit of change there in the stated resistance, but I am sure that the twist can be able to handle it..I vaped the 1.8ohms at 3.9v even though it states 2.2ohms...Still give off good vapour and flavour...but If I put my voltage at 3.7 it will not fire up at all :/....Its like sucking air

I completely agree. I've been using the 1.8 ohm with it on my twist (cranked to its max) and it's been fantastic.
I tried it with a eGo upgrade (freshly charged and in unregulated mode) and with an eGo mini - you can tell the difference immediately. Huge reduction in vapor production and quality.

This really surprised me. I had thought the 1.8 ohm would be a good match for the regular eGo's and the higher ohm ones for the twist, but nope. I use 1.7 ohm mini cartomizers on my mini eGo's and they really perform great.
For me, the vivi nova goes with my twist only or I'm disappointed with its performance.

I have my first mod on its way to me now. It uses high drain 18350 batteries.
I'm really hoping it will perform as well as the twist does with the vivi nova.
Since its my first mod, I went cheap. Its a Gripper from MadVapes.
Not the new VV model, the old simple $20 one.

 

[Bunnyboy]

I completely agree. I've been using the 1.8 ohm with it on my twist (cranked to its max) and it's been fantastic.
I tried it with a eGo upgrade (freshly charged and in unregulated mode) and with an eGo mini - you can tell the difference immediately. Huge reduction in vapor production and quality.

This really surprised me. I had thought the 1.8 ohm would be a good match for the regular eGo's and the higher ohm ones for the twist, but nope. I use 1.7 ohm mini cartomizers on my mini eGo's and they really perform great.
For me, the vivi nova goes with my twist only or I'm disappointed with its performance.

I have my first mod on its way to me now. It uses high drain 18350 batteries.
I'm really hoping it will perform as well as the twist does with the vivi nova.
Since its my first mod, I went cheap. Its a Gripper from MadVapes.
Not the new VV model, the old simple $20 one.

Dont worry. Your vivinova wld definitely work well with the gripper. I have no problems with the vivinova on my lavatube v1 mini. Any vv mod will push it real good!

 

[Ace of Spades]

I completely agree. I've been using the 1.8 ohm with it on my twist (cranked to its max) and it's been fantastic.
I tried it with a eGo upgrade (freshly charged and in unregulated mode) and with an eGo mini - you can tell the difference immediately. Huge reduction in vapor production and quality.

This really surprised me. I had thought the 1.8 ohm would be a good match for the regular eGo's and the higher ohm ones for the twist, but nope. I use 1.7 ohm mini cartomizers on my mini eGo's and they really perform great.
For me, the vivi nova goes with my twist only or I'm disappointed with its performance.

I have my first mod on its way to me now. It uses high drain 18350 batteries.
I'm really hoping it will perform as well as the twist does with the vivi nova.
Since its my first mod, I went cheap. Its a Gripper from MadVapes.
Not the new VV model, the old simple $20 one.

Whoa the gripper!... Good luck on your first mod!!

 

[Ogroman]

Just a quick question here does anyone have a problem for the Vivi when screwing onto the EGo-Twist there is a small gap of about 0.1mm from the batt to the carto. Will it affect anything , by the way i had the steel cone install on the batt that's why i am able to see the gap..

 

[Bunnyboy]

Just a quick question here does anyone have a problem for the Vivi when screwing onto the EGo-Twist there is a small gap of about 0.1mm from the batt to the carto. Will it affect anything , by the way i had the steel cone install on the batt that's why i am able to see the gap..

Nv used a cone myself. But i get what you mean with the gap. I do have it as well. Also, my vivi is able to slighty tilt ard even after screwing ut into the twist. But its not an issue. It works just fine.

 

[snooke_master]

Just dont force screw it too hard, otherwise you have to keep adjusting the ego batt center post when charging...

 

[Ace of Spades]

even my kit , the vivi nova is not that tight ...I see this as the space to have its airflow, if not you will not get anything if you vape

 

[Frenk Furth]

will the EGo-C 650mah (Not the twist) be able to fire up the 1.8 Ohms coil head?

I have this set and work great on all heads which this kit include I do not smoke a lot approximately 1,5 ml per day so my battery holds all day : I have also a few stardusts with 2,4 Ohms and one DCT with 2,5 Ohms and they are also working great