Vls rda, manufactured by OMG, and Heaven gifts sent it to me.
In the box
1x VLS rda by Oumier
2x coils
1x Gold Plated 510 Pin
1x Gold Plated Squonking Pin
1x Bag Of Spare Parts
1x User Manual
1x Angorabbit cotton
You can choose from 3 colors:
Size: 24mm x 45.5mm
Capacity: 1.5ml
Gold plated 510 pin
Peek insulator
This RDA is from Oumier. It is the manufacturer who has designed the Oumier Wasp Nano RDA.
Really unique and interesting RDA, that supports horizontal and vertical single or dual coils. Good build quality, it looks nice in all colors, mine is black version, with black drip tip, black barrel, and silver top cap and base. Base has nice details that helps with unscrewing. In between aiflow slots you can see VLS branding. Bottom of the vls has serial number, Oumier branding, and gold plated 510 pin. 3 o rings on the base holds barrel in place.
VLS comes with 810, wide bore drip tip, comfortable to use.
The top cap and barrel of the Vls are one piece, on the top cap o ring holds drip tip perfect in place.
Cap material:
Golden: PEI
White:Aerospace PC
Black:Aerospace PC
It has 10 air holes, five on one side and five on the other side.
Air comes to coils from sides, holes are drilled out through the posts of the deck.
Adjustable precise airflow, easy to adjust. Airflow can be reduced, so you can use this RDA with really restricted airflow, but I suggest in that case to use only one coil. If you like restricted, just build it with single coil, and reduce airflow, you wont be dissapointed. Just make sure to put coil in the middle, so air can hit it directly through the holes, flavor will be amazing.
Airflow is high and slots are drilled out with angle downward, so there is no chance of any leaking here. So in case you over drip or over squonk you are okay, wont be leaking.
I like a lot of air, so i like this RDA with airflow fully open with 2 coils. Airholes are small, but still there is a lot of air, specially if you use it with vertical coils. It can produce massive tasty clouds.
Build deck is unique, two post, two terminals per post, so as i said, there are different ways you can build on it. I really like the idea, it will be suitable for many vapers, because everyone will find some build to enjoy here.
The idea here is to use horizontal coils for squonking, vertical for dripping, but if you use single horizontal coil you can use it as RDA or you can squonk.
With horizontal coils, when you put in bottom coil, check for hotspots, then put in second one, it will be much easier to remove hot spots.
With horizontal coils use airflow that go through the holes drilled out through the posts. As i mentioned in package you will receive squonk pin and squonking here is just great, no issues at all.
Vertical coils you can build in two ways, you can put them on the inside of the posts, then you will use airflow that is going through the posts, or you can pull them out and adjust airflow to go direct on them, then it will be more airy, but flavor will still be perfect.
Now, what i like a lot, you can remove base (reverse thread). I like it because its very usefull when you build vertical coils, you can simply pull the cotton down, cut it and place it nice.
When you unscrew base, there is a negative screw and a positive screw post.
VLS works just awesome with any build, but I like to use it with dual horizontal build, with airflow wide open, around 60-70 watts, 0.2ohm coils.
Flavor on this RDA is perfect, really, one of the best RDA for flavor, this is definitely for flavor chasers.
Good price for authentic RDA with amazing performance, you can buy it here: https://www.heavengifts.com/product/OUMIER-VLS-RDA.html
In the box
1x VLS rda by Oumier
2x coils
1x Gold Plated 510 Pin
1x Gold Plated Squonking Pin
1x Bag Of Spare Parts
1x User Manual
1x Angorabbit cotton
You can choose from 3 colors:
Size: 24mm x 45.5mm
Capacity: 1.5ml
Gold plated 510 pin
Peek insulator
This RDA is from Oumier. It is the manufacturer who has designed the Oumier Wasp Nano RDA.
Really unique and interesting RDA, that supports horizontal and vertical single or dual coils. Good build quality, it looks nice in all colors, mine is black version, with black drip tip, black barrel, and silver top cap and base. Base has nice details that helps with unscrewing. In between aiflow slots you can see VLS branding. Bottom of the vls has serial number, Oumier branding, and gold plated 510 pin. 3 o rings on the base holds barrel in place.
VLS comes with 810, wide bore drip tip, comfortable to use.
The top cap and barrel of the Vls are one piece, on the top cap o ring holds drip tip perfect in place.
Cap material:
Golden: PEI
White:Aerospace PC
Black:Aerospace PC
It has 10 air holes, five on one side and five on the other side.
Air comes to coils from sides, holes are drilled out through the posts of the deck.
Adjustable precise airflow, easy to adjust. Airflow can be reduced, so you can use this RDA with really restricted airflow, but I suggest in that case to use only one coil. If you like restricted, just build it with single coil, and reduce airflow, you wont be dissapointed. Just make sure to put coil in the middle, so air can hit it directly through the holes, flavor will be amazing.
Airflow is high and slots are drilled out with angle downward, so there is no chance of any leaking here. So in case you over drip or over squonk you are okay, wont be leaking.
I like a lot of air, so i like this RDA with airflow fully open with 2 coils. Airholes are small, but still there is a lot of air, specially if you use it with vertical coils. It can produce massive tasty clouds.
Build deck is unique, two post, two terminals per post, so as i said, there are different ways you can build on it. I really like the idea, it will be suitable for many vapers, because everyone will find some build to enjoy here.
The idea here is to use horizontal coils for squonking, vertical for dripping, but if you use single horizontal coil you can use it as RDA or you can squonk.
With horizontal coils, when you put in bottom coil, check for hotspots, then put in second one, it will be much easier to remove hot spots.
With horizontal coils use airflow that go through the holes drilled out through the posts. As i mentioned in package you will receive squonk pin and squonking here is just great, no issues at all.
Vertical coils you can build in two ways, you can put them on the inside of the posts, then you will use airflow that is going through the posts, or you can pull them out and adjust airflow to go direct on them, then it will be more airy, but flavor will still be perfect.
Now, what i like a lot, you can remove base (reverse thread). I like it because its very usefull when you build vertical coils, you can simply pull the cotton down, cut it and place it nice.
When you unscrew base, there is a negative screw and a positive screw post.
VLS works just awesome with any build, but I like to use it with dual horizontal build, with airflow wide open, around 60-70 watts, 0.2ohm coils.
Flavor on this RDA is perfect, really, one of the best RDA for flavor, this is definitely for flavor chasers.
Good price for authentic RDA with amazing performance, you can buy it here: https://www.heavengifts.com/product/OUMIER-VLS-RDA.html
Last edited:
