VOOPOO Navi 40W Pod Mod Kit 1500mAh

[Frenkyou]

The Voopoo Navi Pod mod 3.8ml was sent to me for review by Ave40, which I thank: Voopoo Navi Pod Mod Kit 1500mAh

The Navi mod Pod has a package that shows on the front the photo of the product, the name of the Mod, the Brand of the device and finally reminds us of the main features with 4 icons arranged vertically.

Later we find the indications on the content, the warnings, the holographic control for the authenticity of the product, the scratch and check, a bar code, indications on the place of origin, the manufacturer's address and finally various logos and brands.

Laterally on the first of the two sides we find indications on the main features of the device, while on the opposite side there are the various social icons where Voopoo is present with its pages.

Inside the box we logically find the Mod, while in the lower part we find an additional package with printed and summarized instructions for use in 3 steps, this package in turn contains the spare parts's.

The kit includes
Voopoo Navi device
3.8ml tank cartridge
Coil PnP VM3 0.45Ω
Coil PnP VM4 0.6Ω
USB cable
Warranty card
Warnings card
User manual

Specifications
Dimensions: 96x34.5x18.3mm
Battery capacity: 1,500Mah
Output voltage: 3.2-4.2V
Charging voltage: 5V / 1A
Capacity: 3.8Ml
Resistance range supported: 0.3Ω-2.0Ω

Available colors (my version is the Mazarine)

The body of the Voopoo NAVI is metal in the front side we find a 0.96 "color screen, above it the circular Fire button, the up and down control keys are at the bottom above the USB socket for charging.

The opposite side presents the Voopooo writing vertically.

On the side we have an insert with a large written NAVI and under the wording "Spark your life"
The other side is the one that differentiates between them the mods based on the coloring, the design is very smooth and pleasant to the touch.

The bottom of the mod as well as having 4 elongated vent holes for the 1,500Mah battery, reminds us that the device is equipped with the GENE chip, which is designed by Voopoo, which is built in China and finally bears the disposal logo and the C E. brand

The upper part of the NAVI shows us the compartment for the cartridge, we can see the two magnets, the air duct in the shape of a conical pin for the coil and finally the two gold-plated contact pins.

 

[Frenkyou]

The lower part of the refillable cartridge shows us the housing for the coil, the two magnets to hold the cartridge to the NAVI and the lifting rubber for the refill.
The Drip-tip is fixed and the Cartridge contains up to 3.8ml of liquid (2ml the TPD version)

The two coils included in the kit are both mesh: one is the 0.45Ω PnP-VM3 with a range of 25-35w, and the other is the 0.6Ω PnP-VM4 with a range of 20-28w.

We can also use all the other PnP Coils, and also the RBA (not included in my kit)

Voopoo NAVI Air-Flow System:

Externally we have above the Fire button an airflow with a shutter system that can be partialized as well as positioned on open / closed (first 2 images above)
Below we can see the internal airflow in the shape of a tapered pin that fits into the cartridge / tank and in the last image the fixed airflow always outside the mod, but on the opposite side with respect to the adjustable one.

Gene Chip:

The Navi shares the same circuit as the Vinci and has a power range from 5 to 40W with an increase / decrease of 1W at a time, also it has a very interesting safety function for the most careless, in case we set a wrong watt value and that does not respect the range of use of the coil, the automatic blocking of the supply is activated, effectively preventing us from burning the resistance. In total there are 7 levels of protection and safety for our NAVI.

How to use:

Five clicks to turn on turn off the Mod (below the initial messages during startup)

With 3 Click on the fire button we can choose between 3 vaping modes P / AUTO / A & P, these three functions are indicated on the screen, with P we vape in the classic way using the Fire button, in AUTO the word says it, we vape without the aid of the fire button, that is like a classic automatic Pod, just by pulling. With A&P inserted we can indifferently use the NAVI automatically or with the Fire button.

Pressing together - and fire we can reset the number of puffs, while to access the interface of the puff counter we must press together + and-.
In the interface we can check the number of puffs of the last 14 days or of a specific day.

 

[Frenkyou]

To lock / unlock the device just press fire and + together
Note: the lock is active only with the vaping function (P), with the (auto) and (A&P) functions it is not possible to lock the Mod (by aspirating you can still vap).

To access the clock interface just press together + and- to adjust the time you always use the cursors + and-
To change from hours to minutes just press the fire button lightly, once we have set the right time, we can confirm by holding Fire to save and exit.

Also with 4 clicks on the fire button we can change the background color.

With the device off, during charging it is possible to monitor its completion.

The small Navi in comparison with the Vinci X with 18650.

Conclusions

I liked the Navi of Voopoo for several of its characteristics:

- Sturdy and very portable with limited dimensions and weight
- Color graphics with good readability of the 0.96 "TFT screen
- Fair battery autonomy from 1,500Mah even at 30W
- Triple Air-Flow system that allows a good adjustment in Flavor
- Intelligent protection with Watt control according to the coil range
- Possibility to mount the regenerable base (also suitable for Vinci)
- Visibility of the liquid inside the tank without having to remove it
- Easy tank refill
- Effective tank holding magnets

I thank AVE40 for providing me with the Voopoo NAVI Pod Mod in exchange for an honest review, (Removed affiliate code)
Voopoo Navi Pod Mod Kit 1500mAh