VV PT box MOD besides these? Variable Volt Passthrough Pass through passthru pass thru

[frankfennel]

I found these but am like %100 set on an iTaste MVP.

There's something called the Tech box mod or something that's older that I can't find info on but didn't really hear good things about.

There are PT Tube mod options for the Provari at Provape, the Saber Touch, and The Darwin, but are all like twice or 3X an MVP and bigger and might not even hold as much battery.

SmokTech Groove: 3800mah but can't vape while charging, bigger than mvp, plastic.

Then there are these which are VV, but only change in large increments and are large. I don't want:

Power Baby and Daddy: NicFitNation.com - Canadian supplier of e-cig kits, parts, accessories, and e-liquids - Power Baby Mod


Cylapex VV-PCCP Cylapex VV-PCCP (CYPXVVPCCP)

Or you can attach a portable USB PSU to a VV Ego PT like the SLB EGO-V or one of the battery-less VV PT Ego like this but always needs a wire and doesn't fine tune volts
Variable voltage 510/eGo USB passthrough


Is there anythign better than MVP for battery life that has VV and is compact?

This review at 9:13 shows the MVP actualyl has two 2200mah batteries for a total of 4400mah, not 2600mah as advertised. What would posess them to advertise it so much lower than it is if the batteries you're not supposed to see say 2200mah on them and likely aren't falsely branded?







Everyone complains the MVP's optional tank ring overhangs a hair, but they probably couldn't move the 510/ego conenctor over to the center more because of existing internals, so better the hair overhang on the ring than a larger box.


A lot of people are excited for the Sigelei Tmax box mod ss vv/vw, but I don't need VW, I don't really need an ohm meter, and the MVP is PT which Tmax isn't.
I heard the MVP vapes slightly lower than the volts you set it to so maybe it's not rms or something I'm not familiar with, but that hopefully will never pose a problem for me.

MVP seems like pure win.

 

[frankfennel]

In the video ^ at 9:13 when he finds the batteries are branded at 2200mah, does that mean they're each 2200mah and the mvp's really 4400mah or that the MVP's only 2200mah and they claim it to be 2800mah?


I searched this and only found it ever mentioned once before here on ecf where someone else saw the same video. Found what seems to be an official manual/pdf that says 2600mah also.

Update: just emailed innokin about this. I'll let yas know. Even if only 2200mah it should last 98% of days with the PT too.

False Advertising lawsuit if it's 2200 and not 2600? Even if 4400 but advertised at 2600 lawsuit? How hard is it to correctly note the mahs of the internal battery?

 

[double_aa_ron]

I could be wrong, but I believe two 2200 mah batteries in sequence does not equate to 4400 mah. I'm pretty sure they are running two batteries as if they were stacked to achieve the higher voltage levels.

 

[frankfennel]

someone else said: "if series-ed up it would double the voltage, but still be 2200, and if paralleled it would be 4400"

It's probably just series-ed up. We'll know for sure when I get the email.
Still, 2600mah and the passthrough is a lot of compact power.

 

[frankfennel]

Reply (quick) from Innokin asking the total mAh of MVP which has two 2200 mah batteries in it:
"Hi ,
we make statement of this issue time ago , the MVP’s standard size battery is real 2600mAh , we open mold and order customize battery like that. however , MVP is VV product , need for high-current discharge , ordingly discharge battery can not meet 5V , The battery supplier produce battery depend on 2600mAh standard, You know , high-current discharge will lose about 15% , 2600x0.85=2210mAh , 2210mAh is precise MVP high-current discharge capacity .

Any questions or assistance , please let us know freely .
Sincerely yours ,..."





Reply (quick) from Innokin asking the total mAh of MVP which has two 2200 mah batteries in it:
"Hi ,
we make statement of this issue time ago , the MVP’s standard size battery is real 2600mAh , we open mold and order customize battery like that. however , MVP is VV product , need for high-current discharge , ordingly discharge battery can not meet 5V , The battery supplier produce battery depend on 2600mAh standard, You know , high-current discharge will lose about 15% , 2600x0.85=2210mAh , 2210mAh is precise MVP high-current discharge capacity .

Any questions or assistance , please let us know freely .
Sincerely yours ,..."



"2210mAh is precise MVP high-current discharge capacity"
"the MVP’s standard size battery is real 2600mAh"

So which is it?
Really 2210 mah falsely advertised at 2600?
Or 'real 2600mah' but loses about %15 on high volt/watt setting that make it only 2210 mah or something like that?



Supprised the review video I linked didn't specify that it's just to series the batteries for higher voltage and isn't 4400mah total.

 

[frankfennel]

Simplified answer to my email from Innokin about how many mAhs the MVP really is:http://www.e-cigarette-forum.com/fo...y-mahs-battery-really-email-itaste-mvp-2.html