VVPV test results and comments

[ukeman]

Sunday morning here in rainy Hawaii (first big rain of the year).
I am gonna try an HV atty on the VVPV... ho hum... nothing but flawless vaping here.

My suggestions so far:
1. get LED to shine into the juice bottle compartment so you can see juice level.
2. I have had no leaking from my 901 atty... the pump system is very frugal (60%VG) so no flooding... but there is no drip well so ...hmmm. I don't need it but just saying.
The VVPV is narrower than the BP so that might be difficult anyway.

I'm getting way more batt life than my BP ... way more. +1
and with the charger as pass-thru (haven't needed that) it's another +1.

* The Charger plug/hole thingy is slightly problematic right now; there is no snug fit. I have to kind of fiddle with it to make a solid connection. I hope that can be addressed. ( i noticed that on the plastic #2 unit when i had it.)

I still have a couple of d/t's that earlier beta testers fitted with hole for use: 510 and a 306 d/t.. i send those along.
Are you ready Gramakitty???

 

[ukeman]

THe bottle is just a dripper , the top cap pulls off the bottle so you can replace the plunger and bottle assem. in one shot , Pg is very thick so it makes sense that it is harder to push IMO. or is it VG ?? forgot now LOL????

Nice stuff Uke and NO you cannot keep that one sorry buddy !!!

but... but... I've got about 50 SR dse 901's here... a ton of Joye SR 510's, etc etc... this PV was like made for me sort of speaking...

I'm trying a couple HV 901's which i don't like nearly as much because for some reason they get hotter and the vapor isn't as easy to produce... stick with SR unless you are familiar with HV.... i guess in any case it's best to stick with what you know to get the best vape.
(3.5 Ohm 901 is pretty good at 3.8 to 4.4v or so)

Gramakitty where are you???

just want to make sure you're on line for next in line.

 

[BuzzKill]

I will look into a LED for the bottle area Uke , good idea.

OK I put another LED ( White ) on it to light up the bottle area when the Hit switch is pressed .

 

[5cardstud]

I will look into a LED for the bottle area Uke , good idea

If you put one on the inside next to the tube then the feed tube and one by would light up when you push the button too.

 

[BuzzKill]

If you put one on the inside next to the tube then the feed tube and one by would light up when you push the button too.

It will be right next to the feedtube 5CS so it might light it up to , I will try it on one of these units to see how it works out .

 

[ukeman]

whoa... i'm trying a LR 1.8 510 bridgeless "dripping atomizer" from Smartvapes. Awesome vape at low voltage. Just awesome.

I was liking that atty anyway, and it's a good one for the top feed VVPV... some say they leak a lot but like i said, less is better and i haven't had any leaks yet. But it shows 510 is a great atty for this.
I take it back ... this does leak...heheh. An empire shield might fix that.

I'm sure anyones favorite would work here. Even some of the rebuilds should work here. Might need a d/t adapter, but i know of 2 Genisis' and the Mart T that do take to dripping.
So virtually any atomizer that you drip with should work.

I wonder if i should send this on to Gram tomorrow, as i pm'd her yesterday and she's not online.

Unless i hear from her by morning, i could go to the next person...? I do have her address from before with #2.

 

[BuzzKill]

Wait until you hear from her please , If she does not answer send it to the next person in line,.

 

[gramakittycat]

Here I am!!! Sorry I could'nt get back as soon as I wanted but PM coming your way Uke.I'm ready to roll!!!!

 

[BuzzKill]

Here I am!!! Sorry I could'nt get back as soon as I wanted but PM coming your way Uke.I'm ready to roll!!!!

Good glad you showed up Gmkc

 

[ukeman]

Packed and ready to ship today.
I put some filtered water in bottle and pumped it through the hose GramaK, so you might want to pump some juice through the tip cap before you put it on the atty to make sure it's flowing.
There is an extra "the dripper" setup too, but i don't know about taking the black plunge-button spring/post cap dealie apart to switch out.
When i got it the top part of the spring peeked up through hole in brass top plate, and i turned the plunger post so it would get back under the plate for optimal plunge.
She's charged up.
Thanks again Mike,
Uke

 

[BuzzKill]

Packed and ready to ship today.
I put some filtered water in bottle and pumped it through the hose GramaK, so you might want to pump some juice through the tip cap before you put it on the atty to make sure it's flowing.
There is an extra "the dripper" setup too, but i don't know about taking the black plunge-button spring/post cap dealie apart to switch out.
When i got it the top part of the spring peeked up through hole in brass top plate, and i turned the plunger post so it would get back under the plate for optimal plunge.
She's charged up.
Thanks again Mike,
Uke

Cool , thanks UKE !~