want to order the spinner. but.....!!!

[drifter17x]

someone said that the ego threads on the spinner are only for the cones and not for any delivery systems. is this true? what products work perfect on the spinner?

 

[ktazz]

I believe only the t3s uses the outer threads. The x2 covers the threads with the skirt but don't use the threads

Sent from my SPH-L900 using Tapatalk 2

 

[JoAnnW]

No worries! You can use all SI's juice delivery systems on the Volt spinner.

The X2 clearomizer works great if you prefer the warmer vapor from top coils and the T3 is great for a much larger capacity and replacement coils.

 

[drifter17x]

besides the t3 what can I use on the outer threads

 

[JoAnnW]

The X2 clearo's.....

 

[drifter17x]

besides anything from si to be exact lol

The X2 clearo's.....

 

[JoAnnW]

besides anything from si to be exact lol

If you use adapters, there are other options but most adapters are connected to the 808 threading. You would have to use a cone or sleeve to cover the ego threads... to give it a sleeker look. Using adapters however makes your setup look much longer.

 

[homeprogreen]

An thing that screws on to the ego threads will work on the spinner

 

[cindycated]

An thing that screws on to the ego threads will work on the spinner

Not necessarily...sometimes the posts don't touch. But then, sometimes they do, so maybe you'll get lucky.

You can find CE4/clearo-type ones with replaceable heads out there with 808 threads. Or just use an adapter, like JoAnn said, if you wanna try anything made for 510s (like vivi novas, splitfires, etc.).

 

[drifter17x]

so if I wanna use the boge f16 cartos for the spinner I can with an adapter? then how do I hide the ego threads?

Not necessarily...sometimes the posts don't touch. But then, sometimes they do, so maybe you'll get lucky.

You can find CE4/clearo-type ones with replaceable heads out there with 808 threads. Or just use an adapter, like JoAnn said, if you wanna try anything made for 510s (like vivi novas, splitfires, etc.).

 

[WorksForMe]

The only eGo threaded clearos I’ve seen that work with the Volt Spinner are S.I.’s T3 and the Kanger T2. If you want to use the 510 threaded F16 carto/tank system on a Volt Spinner, you will need an 808 to 510 adapter. A short cone will cover the eGo threads but not the adapter.

IMHO, adapters are a temporary solution at best. You’re better off in the long run to use a juice delivery device that is designed to be used with the battery you’re using. If you really want to try a tank system on a Spinner, you can get an 808 threaded carto/tank system from a different vendor to use with the Volt Spinner, or you can get a 510 threaded Vision Spinner for the F16 system.

J.R.

 

[homeprogreen]

You can use the boge with an 808 to 510 adapter. I have the shorty adapter and it only adds about an 1/8th of an inch to total length. Then you use ego cone to hide threads. The SI long cones fit over the boge and adapter. If you want to use a vivi nova tank it's the same adapter but you use a dct cone that screws onto the ego threads. I use the style "D" DCT cone from Smoktec on my spinner. I'm having my first cup of coffee of morning. No shorty adapter for using boge on spinner so you have to use regular one. Just make sure it's the one for 510 device to 808 battery. They add about a 1/4 inch to length