• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Want to try a new tank system, advice?

Status
Not open for further replies.

Bubblegum

Super Member
ECF Veteran
Jun 13, 2013
356
98
UK, Kent
Hi Guys!

Been a while since iv'e been on E-cig forum.

But i'm glad to say i am STILL analog free!! Thanks to the Jac vapour and Ego system.


But i want to try something new!

I have this kit form fasttech - EGO-EVOD 6-in-1 Rechargeable 900mAh Electronic Cigarettes Set (https://www.fasttech.com/p/1368507)


What else can this battery use in the way of e juice delivery systems? tanks etc?

Want to try something new been using the EVOD system for a while now.

I'm going to order it off FT as it's much cheaper plus i need some more juice from them too!

Any advice fellow e cig smokers?

thanks :)
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK

Bubblegum

Super Member
ECF Veteran
Jun 13, 2013
356
98
UK, Kent
How about a carto tank ?

Boge LR carto's, a carto punch and a Wee Boaby tank.

Takes some beating in my opinion.

Wee Boaby Pyrex Tank (dcc-wbgt) by www.alba-vapours.co.uk

Not FT but you will get them pretty much next day.

I only wanted them from FT becuse they owe me a EVOD tank since one of mine was recived cracked so they said they would chuck it in the next order i make for free.


I say you should try a mini Protank.

Seriously, it embarrasses the evod. :)

On Fasttech they are £7. You can get them in 2-3 days in the UK for just £9.49.

Kanger Mini Protank - Clearomizers

I know what I'd do.

Thanks mate. That's what i was looking to go to try next the PROTANK>

This the £5 clone version
https://www.fasttech.com/products/1424416

Also if you don't mind the larger size the X9 Protank is ok too, it can use the heads you got with the ego/Evod kit. If you get the X9 or a Kanger Protank get one of these to provide support and smooth out the look
$1.15 EGO Battery Convertor Ring for 3.5mL ViVi Nova Atomizer at FastTech - Worldwide Free Shipping

So if i go for the clone version my battery would work fine with this as for all the Voltage and ohms and stuff?
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
I only wanted them from FT becuse they owe me a EVOD tank since one of mine was recived cracked so they said they would chuck it in the next order i make for free.

Thanks mate. That's what i was looking to go to try next the PROTANK>



So if i go for the clone version my battery would work fine with this as for all the Voltage and ohms and stuff?

Yes, the Ego battery works with pretty much anything.

Protank/Ego with beauty ring
image.jpg

Protank/Ego without beauty ring
image.jpg

This one is the original glass Kanger Protank that comes with a beauty ring in the pack.
https://www.fasttech.com/products/0...ger-protank-clearomizer-with-pyrex-glass-tank
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
This the £5 clone version
https://www.fasttech.com/products/1424416

Also if you don't mind the larger size the X9 Protank is ok too, it can use the heads you got with the ego/Evod kit. If you get the X9 or a Kanger Protank get one of these to provide support and smooth out the look
$1.15 EGO Battery Convertor Ring for 3.5mL ViVi Nova Atomizer at FastTech - Worldwide Free Shipping

I have my £5 clone now the KWX10 Protank, it is glass like the Kanger and very well made, looks likes it takes the normal Protank replacement head too.
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
Should i try the mini or normal size one? also do i needs extra heads?

they have options of


protank 1.8ohm / 2.5ohm / adapter ring

so you get 18.ohm and a 2.5ohm.

Confusing what do i need?!

I usually go for 2.5 ohm.

Mini is more ego sized, more useful to carry about, full sized needs filling less often but is bulkier and heavier.
 

wv2win

ECF Guru
ECF Veteran
Feb 10, 2009
11,879
9,045
GA by way of WV
If you go for 2.5 heads you will need a twist so you can get the volts up to about 4.5 or so.
If you go for the 1.8's then a normal 3.7 battery will do.
Personally if your going that route i would definately go for the twist or spinner type battery, then various heads are no problem.

Not true, I am afraid. The twist/spinner has a weak 2.5 amp switch regulator which limits what head you can use on it.

To not be concerned with what head you can use on a PV, you need a minimum 3.5 amp switch. Models like the Vamo have a 5 amp switch. The iTaste V3 has a 3.5 amp switch and is actually smaller than the twist/spinner. The Vamo, Zmax, Provari, etc allows one to not be concerned about the ohms of a particular head. The twist/spinner will limit what you can use on it.
 

cvedrick

Super Member
ECF Veteran
Verified Member
May 13, 2013
326
172
League City, Texas
Should i try the mini or normal size one? also do i needs extra heads?

they have options of


protank 1.8ohm / 2.5ohm / adapter ring






so you get 18.ohm and a 2.5ohm.

Confusing what do i need?!

Get the lower resistance heads, (can be used in EVOD FYI) the EGO battery will not overwhelm the 1.8, however if yo move up to a mechanical mod, you will then wan the higher resistance.

Also give some thought to the VAMO V3 and or the itaste SV3 I wish I vound out about variable wattage sooner.

ON the low cost end look at RDAs (rebuildable dripping atomizers) and RBAs (rebuildable atomizers) FT sells several of each and they are worth looking into as they give more flavor and or vapor
 
Status
Not open for further replies.

Users who are viewing this thread