wanting to build a mod

[dynasty]

i use cartomizers and want to continue to use them. ive been looking through here and am only seeing mods for attomizers and cartridges. just looking for advice on what to do/wwhere to start. theres to much information floating around here for me to be sure what will work with my current cartridges. im using a kr808 battery and cartomizers. any information would be greatly appreciated

 

[asdaq]

Just about every mod you see here will do fine with cartomizers too. Just use a 808 connector instead and the world is your oyster.

Good luck!

 

[jctennis]

Just about anything can be adapted you just need to buy the right battery connector, or just try 510 cartos. either or. Frankly I love 510 cartos, but the kr808d-1 cartos were meh. Madvapes has the 510 cartos in 2.5 ohms (works awesome on 5volts) and 1.5 ohms.

 

[Sci]

You can also get the 808 connectors @ Mad Vapes.

 

[bigblue30]

i use cartomizers and want to continue to use them. ive been looking through here and am only seeing mods for attomizers and cartridges. just looking for advice on what to do/wwhere to start. theres to much information floating around here for me to be sure what will work with my current cartridges. im using a kr808 battery and cartomizers. any information would be greatly appreciated

Welcome to the 808 mod world. I only use 808's and I had to learn how to mod so I could have one. There are not many 808 mods out there.

Here are a few I built:
http://www.e-cigarette-forum.com/forum/battery-mods/114901-evercool-variable-voltage-mod.html

http://www.e-cigarette-forum.com/forum/battery-mods/102419-adjustable-voltage-box-mod.html

 

[WillyB]

I'd suggest you move to the 510 cartos. There are many options available now. I like the the Boge 3.1Ω soft cap ones. There are other manufacturers and a lot of ohm choices to experiment with, and they work fine with sealed 510 connectors.