What 26650 for 30 max watts?

[sofarsogood]

I'm fascinated by the Escribe software but wasn't willing to own a DNA200. A DNA75 mod that takes a 26650 looks interesting. I don't go above 400 degrees and 30 max watts and build the highest ohm coils my mods allow (Pico and VTC mini). My current go-to is the LG HG2. What's the smart choice for endurance at 30 max watts in a 26650?

Thanks in advance for any assistance.

 

[sonicbomb]

30 watts is 8 amps at 4.2 volts and 10 amps at 3.2 volts when the cell is discharged assuming a 90% efficient mod. So pick one from the list below as they all exceed this amp limit.

List of Battery Tests | E-Cigarette Forum

The Imren Purple has a 5200 mAh capacity but at a 10 amp CDR this gives you no safety headroom.

Imren Purple 22A 5500mAh 26650 Bench Test Results...only a 10A/5200mAh battery!

 

[marquee]

I can definitely recommend the green Efest. I had become sceptical about Efest, but Mooch's test convinced me and I have not been disappointed.

 

[nelsonm64]

I'm using the new "metallic" purple fests. 35a (20a) actual, 4200mah. been running them at 30-40 watts on a dna75 and they've been excellent! they run down to 3.4v with no errors. really liking them sofar

 

[acee]

I'm using the new "metallic" purple fests. 35a (20a) actual, 4200mah. been running them at 30-40 watts on a dna75 and they've been excellent! they run down to 3.4v with no errors. really liking them sofar

30-40 watts on what type of/ohm build?

 

[nelsonm64]

30-40 watts on what type of/ohm build?

usually 26g kanthal @ 0.8-0.9

 

[KenD]

30-40 watts on what type of/ohm build?

Doesn't matter on a regulated mod.

Watts (+10% or so to account for chip inefficiency) / battery cutoff voltage ( = the highest draw) = amps

44 (40w+10%) / 3.2v = 13.75 amps

Sent from my M7_PLUS using Tapatalk

 

[acee]

Doesn't matter on a regulated mod.

Watts (+10% or so to account for chip inefficiency) / battery cutoff voltage ( = the highest draw) = amps

44 (40w+10%) / 3.2v = 13.75 amps

Sent from my M7_PLUS using Tapatalk

I was asking because he said he can run the battery down to 3.4v without any errors. So i was wondering what ohms he was vaping at 30-40 watts. In my flask stout with a 26650 in it, I run a .59 at 50 watts and hit a "weak battery" warning around 3.9v of battery remaining.

 

[sofarsogood]

30-40 watts on what type of/ohm build?

I was asking because he said he can run the battery down to 3.4v without any errors. So i was wondering what ohms he was vaping at 30-40 watts. In my flask stout with a 26650 in it, I run a .59 at 50 watts and hit a "weak battery" warning around 3.9v of battery remaining.

My complete set up is in the signiture area below. I try to keep resistance high for the sake of power efficiency. My Pico and VTC mini say no more than 1.5 ohms. I usually end up at 1.3-1.4 ohm with 28 guage stainless and get the vape I want.