So what's everyone vaping on now a days on your reos??
Itching to try something new.
Itching to try something new.
What are you vaping on your reo today?
- Thread starter SteamStack
- Start date
- th_trl_thread_readers 0
- Status
Unflavored on the RM2 killer - YFTK Viper V2 Style RDA Silver 316 SS PEI 14mm Rebuildable Atomizer
(sold out of course
)
(sold out of course
)
The main Reo daily drivers are always my five P67's... for months four have been running Kryten's, the newest one a Black Goon LP for 2+ months.
Back ups are a couple of my 2015 Woodvil's... one is currently trying out a Black Pulse, the other a Black Serpent BF.
Coming to try on the P67's is some just released new mesh RDA's (that come with squonk pins) and rolls of KA1, Ni80 and SS316L mesh for them. These will be cloud monsters that will go through some very serious joose reserves. However, the low ohm mesh builds will take all that the highest rated high drain batteries can handle on the Reos. So I will also bring back 150W or 200W TC Mods to drip them on. A plus is that these atty's can easily also run single, dual, quad, parallel, Clapton, etc coils that won't push the batteries as hard on the Reos. I could have them as early as Saturday night.
Back ups are a couple of my 2015 Woodvil's... one is currently trying out a Black Pulse, the other a Black Serpent BF.
Coming to try on the P67's is some just released new mesh RDA's (that come with squonk pins) and rolls of KA1, Ni80 and SS316L mesh for them. These will be cloud monsters that will go through some very serious joose reserves. However, the low ohm mesh builds will take all that the highest rated high drain batteries can handle on the Reos. So I will also bring back 150W or 200W TC Mods to drip them on. A plus is that these atty's can easily also run single, dual, quad, parallel, Clapton, etc coils that won't push the batteries as hard on the Reos. I could have them as early as Saturday night.
I'm definitely a single coil, MTL vaper and I'm using O-16s and Chalice IIIs mostly. I still fall back on an RM2 or an RM3 sometimes, and I still like them as well as any others I've tried, pretty much. I guess my overall favorite atty for MY purposes remains the Chalice III. I like everything about it. However, I realize it's probably not airy enough for DLHs....
Daily is a CAM MantaV2.
Single coil, top air, great flavour.
For me, nothing else has proven to be as over squonk tolerant as the MantaV2.
cheers
I
Single coil, top air, great flavour.
For me, nothing else has proven to be as over squonk tolerant as the MantaV2.
cheers
I
One of the best looking and best machined attys that I have seen. I was never able to cool it down enough for me.
I know exactly what you mean. I run it wide open all the time, and I don't dare wrap a coil below about .7-.8 ohms or it's not quite right...little warm...for me. But that's my perfect sweet spot, and has been for several years now. I agree it's the best machined atty....it's the best I've owned, anyway. I've been a big fan of all the Chalices.
I vape unflavoured in my 3 O-16's plus a spare, tried vaping a Rm2 recently boy was the draw tight.
I had to drill mine out, just too tight as it came stock.
My file was tapered and it did'nt work quite right so I, like Tim the Toolman Taylor, geared up the drill, more power.
Thanks guys for the Info..
I've been using the origin little 16 x2 since it came out.. Also have an original Derringer I modded to bf. Also a couple of Hornets I also recently modded for others (kept one for the wife's reo mini 14500) and a cyclone with afc and a couple old rm2s of course. A few others as well.
I get bored every great while and need something to play around with.. so I just bought me a authentic Psyclone Hadalay! Last one i could find online
Wife always says no but,what the hell.. won't be the first or last time I say yes. Hehe
I've been using the origin little 16 x2 since it came out.. Also have an original Derringer I modded to bf. Also a couple of Hornets I also recently modded for others (kept one for the wife's reo mini 14500) and a cyclone with afc and a couple old rm2s of course. A few others as well.
I get bored every great while and need something to play around with.. so I just bought me a authentic Psyclone Hadalay! Last one i could find online
Wife always says no but,what the hell.. won't be the first or last time I say yes. Hehe
My "in house" drill can only do up to 3/8" bits, but it is good enough to make tootle puffer atty's into DLH atty's (I prefer the drill press/vise that are buried in storage someplace).
Unfortunately my modifications to one of my Chalice III's failed to get even close to what could be called a restricted DLH atty, so all of the Chalice III's and II saw little use before being retired. But then all of my small chamber atty's are pretty much retired (the Nuppin's, O-16's, Cyclones, Era's, NoGain, IGO-S, RM2's, RM3's, and a bunch of others). So is all the atty's I got from CAM (including all the authentic ones). But then so is most of the atty's I bought for the TC Mods while away from here after the forum closed, and every atty bought before I bought my first Reo 3 years ago for the GP's, ProVari's and the many tube modes before them.
I run 22mm-30mm atty's now days, none of which started out life as a tootle puffer atty.
I am still using 2 Chalice III's on 2 of my mini 14500's, and a Nuppin on my P67. Right now those are the only ones, I have set up for use. I have never changed the way I vape, always set my coils up around 2.0 to 2.2 OHM's in everything I vape on. I am a wimp I know.
KAS
KAS
I am still using 2 Chalice III's on 2 of my mini 14500's, and a Nuppin on my P67. Right now those are the only ones, I have set up for use. I have never changed the way I vape, always set my coils up around 2.0 to 2.2 OHM's in everything I vape on. I am a wimp I know.
KAS
It be boring if we all vaped the same
I vape on my standard cyclones and no fear again a lot. Past couple of weeks have been the divo and chalice III. Waiting on my hornets to get back from catfish. Mtl is all I do, I have other attys for lung inhales though when I'm feeling the need for more vapor.
Last edited:
- Status
