What Atomizers Do You Use for Dripping?

[dodari]

Hi,

Got the 3 WTA juices from Jerry yesterday, really great, calmed me down very good.

I only had 2 Attys left, never did much dripping before, don't remember where they came from. Anyway they both fizzled and now I need to get some more quickly as possible.

BUT, I don't know which nor whose to get. Also should they be bridged or bridgeless and who do you get them from? I have a couple of VVs(Smoktech VV Box) and some have said to try and stick around 2 to 3 Ohm resistance on the attys.

Thanks for the advice, please.

 

[radiokaos]

I hope someone will chime and offer a few suggestions.

Since I really don't sell hardware its hard to say which one is best.

For me I use Joye Atomizers both low resistance and high.

I also use 901 and 510 atties.

I wish I could offer more advice but I'm not a expert when it comes to atties.

 

[hittman]

I prefer an lr901 for sampling liquids. However, I think a standard resistance 510 would be fine. I never messed much with removing bridges.

 

[dodari]

Having gotten more info I'm gonna go for around 3 Ohms, more or less, with bridges. Friends say don't sweat it since I can push some voltage. Sooooooo, cool.

 

[Mr.Mann]

Listen to what Jerry said. I think it is more than enough to start out with simple "authentic" Joye 510 attys. Remember to blow out all the primer really good first, and know that it will take about a day of vaping before it really settles in, or "breaks" in. I also like to start vaping at lower voltages and then after dripping again I will boost the voltage up .1. By the time I get to my desired voltage it is ready!

 

[dodari]

Listen to what Jerry said. I think it is more than enough to start out with simple "authentic" Joye 510 attys. Remember to blow out all the primer really good first, and know that it will take about a day of vaping before it really settles in, or "breaks" in. I also like to start vaping at lower voltages and then after dripping again I will boost the voltage up .1. By the time I get to my desired voltage it is ready!

The WTA juices are really great, but attys seem to be leaking out bottom.

Mr. M, is Jerry saying like to use Ego-T or Ego-C rig? I don't know if I still have any of the Ego stuff or not, I'm open to suggestions that work. Is he, or anyone, using the Joye attys with the Ego-T/C tanks, those plastic thingeys? Need to stop leaking all over the place.

Thanks.

 

[doots]

BetterLife 510 3-Hole Dripping Atomizers (2.0-2.5 ohm) [BL510-3Hole] - $4.99 : ValueVapor.com, Discount Electronic Cigarettes and e-Liquid
best atty on the market if you use a 510.
$4.99 each. Ships fast.
Dont let the price fool you!
Been using these for months and have tried all of them on the market..
Give one or two a shot. You won't be disappointed!

 

[dodari]

doots,

Thanks, I'll give em a shot.

 

[radiokaos]

sounds like you need a drip shield .......

 

[Mr.Mann]

The WTA juices are really great, but attys seem to be leaking out bottom.

Mr. M, is Jerry saying like to use Ego-T or Ego-C rig? I don't know if I still have any of the Ego stuff or not, I'm open to suggestions that work. Is he, or anyone, using the Joye attys with the Ego-T/C tanks, those plastic thingeys? Need to stop leaking all over the place.

Thanks.

Look into empire mods drip shields. You will also need a 510-510 sealed regular size (not shorty) adapter. Or, just drip less and really monitor the atty. It takes a bit of practice, but now it is just like drinking water for me: when I get thirsty, I drink; when my atty needs juice, I drip. Not trying to be funny, just trying to illustrate a point. I didn't learn how to get the most out of an atty overnight though. It took a couple weeks, and I used attys exclusively during that time!

 

[dodari]

Look into empire mods drip shields. You will also need a 510-510 sealed regular size (not shorty) adapter. Or, just drip less and really monitor the atty. It takes a bit of practice, but now it is just like drinking water for me: when I get thirsty, I drink; when my atty needs juice, I drip. Not trying to be funny, just trying to illustrate a point. I didn't learn how to get the most out of an atty overnight though. It took a couple weeks, and I used attys exclusively during that time!

Luckily a friend of mine watches this forum and knows me, old college buddy, and brought by the stuff you mentioned above. Really helps, less mess, less wasting the DHT(I call it wonder juice) and thus very enjoyable. Plus today I've only had 1/2 analog, my goal being to get rid of the darned things.

Thanks for the help. Really like the G.I. JOE and DK-TAB I got, but the DHT is Supreme I think. Ordered 4 more on Saturday.

My wife is now as addicted(happily so) to Jerry's WTAs as I am, she's ex-smoker too.

 

[ambiguous02]

I have been using a drip-o-mizer from liberty flights and it has made dripping a breeze.

 

[coffee snob]

I love the Cisco spec 2.5 from avidvaper.com. I did just order the HH357 long barrel 2.5 just to see if they up to all the hype.

 

[Dream]

HH.357 Cisco Specs

 

[kingcobra]

I've tried dripping but the slightly better taste that I get isn't worth the inconvenience to me or the risk of getting juice in the button or the wheel of my Darwin. I don't have another PV so I really don't want to have to wait several weeks sending it in for repairs I do have some old 510 batteries I can use but that doesn't sound good.

People think what I do use is so old school that some people make fun of me but I've been using 510-t's for almost a year now and it's pretty damn close to dripping without the fuss. The tank only holds half a ml but I'm a pretty light vaper so I don't have to fill it more than a couple times a day.

Now this probably works better for me since my PV mostly sits on a desk when I'm home or at work and I keep the arm at a 45 degree angle which allows the wick to stay wet. If I vaped out of my pocket a lot I might want something else that delivered juice more quickly.

Some of the Aroma juices are also on the thick side which may present some additional challenges.

I admit it though, I'm way too lazy to drip

 

[dodari]

I've tried dripping but the slightly better taste that I get isn't worth the inconvenience to me or the risk of getting juice in the button or the wheel of my Darwin. I don't have another PV so I really don't want to have to wait several weeks sending it in for repairs I do have some old 510 batteries I can use but that doesn't sound good.

People think what I do use is so old school that some people make fun of me but I've been using 510-t's for almost a year now and it's pretty damn close to dripping without the fuss. The tank only holds half a ml but I'm a pretty light vaper so I don't have to fill it more than a couple times a day.

Now this probably works better for me since my PV mostly sits on a desk when I'm home or at work and I keep the arm at a 45 degree angle which allows the wick to stay wet. If I vaped out of my pocket a lot I might want something else that delivered juice more quickly.

Some of the Aroma juices are also on the thick side which may present some additional challenges.

I admit it though, I'm way too lazy to drip

Dripping at home is ok I guess, rather messy and fiddley for me. I am trying the DHT(vg) in a Boge standard carto. So far I've gotten 2 days out of the first trial carto, still feeding ok I think, maybe. It's showing 3 Ohm running at 4.5 to 5 volts, depending on my ability to taste, taste buds are probably fried from smoking little Rez. cigars. I could get the little cigars for 10$/carton, discounted to $7.50, as I have BIA card with number.

I am wondering if the Red Tail Dark Honey Tobacco flavor( VG if I have it correctly ) can be thinned a little bit to facilitate delivery in the carto? I don't know what that would do to the flavor nor what it would do to the effectiveness of the WTA? Just don't know at this point.

Anyone that does know I hope you'll comment. Can't drip while I'm operating some fairly heavy equipment nor driving up in Albuquerque mad house.