What atty's do YOU use in your ufs??

Status
Not open for further replies.

Tgoode

Super Member
ECF Veteran
Verified Member
Jan 13, 2012
451
254
Ontario
tgoode.zenfolio.com
I been using a dual coil 2.4 ohm and it sucks tbh LOL, after a good hitting atty i have a short hh 357 but its red and also i have no extender or mouth piece :(

Nige

The problem I find with dual coils is that they are either starved or flooded. If they are starved the bottom coil is good, but the top coil is burning juice. If flooded, the bottom coil is flooded and the top is ok. The conditions have to be just right for them to work well. They work fine when dripping though.
 

k3v1n

Ultra Member
ECF Veteran
Verified Member
Dec 7, 2011
2,204
2,036
London, England.
Nige, I've got a spare extender or you get one to these stainless steel drip tips, they are made by Siam mods and are 4cm long.

Get them from - s a f e r c i g s . c o . u k

0

0
 

Yakster

Full Member
Verified Member
Feb 20, 2011
28
0
Australia
Bit new to the gg ufs etc finally got one.Just wondering what most people are using :)
Nige

LR 306's with extralong driptip with the V2 UFS cap.
If you flood the atty, pull the driptip up & "suction" the juice from the collection tank back into the main tank.

Yak.
Yak,Bright Early <-- Pick any TWO!!
 

Zogem

Super Member
ECF Veteran
Verified Member
Nov 17, 2011
357
220
Atlanta
Bit new to the gg ufs etc finally got one.Just wondering what most people are using :)

Nige
I use I kenVape 3.5Ω @ 6v. I've dripped with them for a while. Put one in a UFS once I had hand strength to adjust things, and haven't turned back Still running the first one I put in a UFS when I started to get the hang of it.. that was a few weeks ago.. probably about 50-60 ml of juice, with some floods and dry hits in the process. No performance change yet.

I did have problems with the 4.5Ω @ 7.4v.. but that could have just been me.

-Z
 

SparkyII

Full Member
Feb 4, 2011
55
16
UK
I use these sort of 2Ω steel bottom coil cartomizers with the filling pulled out with tweezers. They're easily as good as a 510 as well as being much cheaper, they're the perfect height for the ufs, coming right up to the top of the cap and you can easily inspect the coil to see how flooded / burnt out it is. You also don't lose any excess juice in the filler if they go wrong when they're soaked.
 
Last edited:

Major

Supplier Associate
ECF Veteran
Mar 22, 2011
1,956
1,888
Panama City, Florida
www.ggecig.com
I use these sort of 2Ω steel bottom coil cartomizers with the filling pulled out with tweezers. They're easily as good as a 510 as well as being much cheaper, they're the perfect height for the ufs, coming right up to the top of the cap and you can easily inspect the coil to see how flooded / burnt out it is. You also don't lose any excess juice in the filler if they go wrong when they're soaked.

Those appear to be the Kanger bottom coil cartos in the link pix. I have used them for months without any issue in both 510 and 808 (with stealth 510-901 adapter). In addition to being a cheaper alternative, they suit my taste buds handsomely and are the proper length to not require an extender.

I have a long barrel HH 357 but just am not into hot vapes so I much prefer the Kangers.
 
Status
Not open for further replies.

Users who are viewing this thread