RDA What build with this wire and what power?

[hawwy]

basically i bought some clapton wire it is
32/24 awg.
Made a coil of that with 5or6 wraps around 2.5mm and reading at 0.14 ohms .
It kills all the juice i dripped in one drag. Dont know what power i should be vaping at

So was wondering what spec would you build the coil how many wraps diam etc and what wattage? For clouds and flavour

it has got dual coils but when i ran the too it was too low resistance to fire.

 

[nyiddle]

Yeah I wouldn't suggest running that low. Personally it ends up too hot. If you can fit more wraps on your deck (it's hard with clapton wire), do that. Bigger diameter too.

My preferred clapton coil is actually a single coil setup, it's nice and warm but plenty flavorful. Chucks on par with most dual coil low-ohm/high-wattage builds, but it definitely eats juice like a madman. That's kind of the nature of claptons, since it has so many extra nooks and crannies for juice to get wedged up in there. It helps to have a nice big juice well and very loose wicking.

 

[hawwy]

What you recommend the. For a clapton with 32/24 gauge if i was to put it in my subtank mini

 

[nyiddle]

What you recommend the. For a clapton with 32/24 gauge if i was to put it in my subtank mini

You won't be able to fit a clapton in a Subtank's RBA. Not nearly enough space.

 

[Nikea Tiber]

Clapton coils have been squeezed into the subtank rba deck. I don't think I'd use a 24 awg core clapton for that, though. A 26 is probably the largest core I'd use for that.

 

[hawwy]

What would you recommended to use with the clapton i have then in my plume veil rda
Thanks

 

[disallowedword]

I have been looking at trying the vertical build in my subtank mini.
Kangertech OCC ( Vertical coil build and wick ) | E-Cigarette Forum
Is it possible to do a build like this with Clapton wire? If so that might give you the resistance you need.

ETA: whoops that was an occ coil build, here is the RBA
Vertical coil / wick build on Kangertech RBA (Great for 20/80 juice) | E-Cigarette Forum