What coil comes with berserka mini?

[vapemate93]

I was just wondering if anybody can list the specifications for the standard coils that come inside the box of a berserka mini?

I've found this coil is the best build for me so I'm trying to make my own version of it.

 

[Fredman1]

Looks like a 2.5mm clapton. 0.5ohm resistance.
Does yours gurgle and leak? Mine is doing it on and off...

 

[vapemate93]

Looks like a 2.5mm clapton. 0.5ohm resistance.
Does yours gurgle and leak? Mine is doing it on and off...

Thanks mate, yes it does it happens on all the berserka minis from what I've heard/seen . It's something to do with the narrow chimney I think I heard. It happens to mine after I've filled it most of the time and need to drag it a few times then it will be okay. I've seen a video on youtube on how to minimize the gurgling but unfortunately I can't remember what the title was.

Also I know they tend to leak just after you fill them up, incase you have had this issue I've found the best way to prevent the leak after filling is placing your finger over the open air hole and have a couple of tapes and it should then be fine.

Unfortunately the gurgling and leaking is a common issue on the berserka mini, if I can find the video I was talking about I'll post it on this thread. Hope this helps, and thanks for the info on the coil .

 

[Fredman1]

Thanks for that mate. It sure is a very good vape, but the gurgle and leak is pissing me off...
Would very much appreciate that video

 

[vapemate93]

Thanks for that mate. It sure is a very good vape, but the gurgle and leak is pissing me off...
Would very much appreciate that video

Ya welcome mate, it's awesome little vape I love it despite its annoying faults its the best tank I've owned. I wonder if they will make a updated mini regarding these as its a well known issue.

Yeah one thing I like about the tank is yes it does leak but for me it's only leaking after its been filled and after a few drags it's fine for me until the next refill. So after its had its little leaking tantrum which I always know when it's going to leak, I've found it doesn't leak at all until its next refill which is perfect for me as I can trust it in my pocket, upside down without any leak. Sure mate I'll look for it if a can see it will post it. I've had other tanks such as the Milo 3 which will leak very slowly all the time in pocket and next thing I know I look like I've peed myself .

 

[vapemate93]

Not the same video but if you watch the way he fills it that should reduxe/eliminate the gurgerlin.

 

[Fredman1]

Thanks a bunch for that mate. Yeah mine is a bit different. After a fill, it gurgles and I have to keep tipping it on its head, to blow the juice out. It last sometimes the first half of the tank. Other people said to fill it from the bottom, but I refuse to do that. Way to much hassle. I have other tanks with much less trouble that vapes equally good.

 

[JCinFLA]

If you will bottom-fill the Berserkers...you won't have leaking nor gurgling. I've always refilled mine that way and had neither problem. It's no more trouble than top-filling, because either way you have to unscrew and remove a part to refill the tank. Only difference is where the part is that you have to remove. But the result is very different!

 

[JCinFLA]

You can also go to the following thread, and start reading from about page 57 - 61, to find a couple other options, too.

Vandy Vape BERSERKER (24mm) MTL RTA

 

[JCinFLA]

Removed double post.

 

[Fredman1]

Thanks for the link. I thought I saw something it a while ago. Went looking for it but couldn't find it...guess I didn't look to hard.
Thanks again

 

[vapemate93]

No problem mate, bottom filling is probably the way to go I think from what I've heard. One more thing you don't happen to know if the standard coils are Nic do you? Reason being I've tried using SS and even my SS version of the build it still has longer ramp times and I need to hit it at a higher power for the same vape.

Thanks man.

 

[Fredman1]

Nah don't know mate. I pretty sure it would be kanthal.

 

[vapemate93]

Nah don't know mate. I pretty sure it would be kanthal.

I've just used kanthal on my latest build it's much better. You had any luck with yours?

 

[Fredman1]

Yeah I have a 3.0mm kanthal in. I properly stuffed the coil with cotton. I actually had to screw the cotton into the coil. Stuffed the cotton into the holes, and bottom filled it. Tank is almost finished and it hasn't leaked yet.
Will see how the next fill goes...

 

[vapemate93]

Yeah I have a 3.0mm kanthal in. I properly stuffed the coil with cotton. I actually had to screw the cotton into the coil. Stuffed the cotton into the holes, and bottom filled it. Tank is almost finished and it hasn't leaked yet.
Will see how the next fill goes...

Awesome glad you found away to sort it mate, I'll need to try that on my next build. How you liking it minus the issues you have had?

 

[Fredman1]

Oh I love it. Damn good vape. What I like most is its compact. Fits in the pocket well..

 

[vapemate93]

Oh I love it. Damn good vape. What I like most is its compact. Fits in the pocket well..

Yeah same here can get the perfect MTL tightness I think. I'm running it on second largest airhole and its great for me