What do I do Di?

[stroh22]

I just got my Indulgence today. Haven't tried it yet because my batts are charging. Only saw the red light no green light for me. Definitely looking forward to trying it. Although I have a problem with one of the adapters. It is bent and looks like it may cause a problem. I'm in the office at work so I won't get a chance to check the threading out until I go to lunch. Looks like it might start to cross thread - and I don't want that to happen.8-o
Di, what do you think I should do?
I am so lookin forward to giving this thing a go!

 

[Di]

I just got my Indulgence today. Haven't tried it yet because my batts are charging. Only saw the red light no green light for me. Definitely looking forward to trying it. Although I have a problem with one of the adapters. It is bent and looks like it may cause a problem. I'm in the office at work so I won't get a chance to check the threading out until I go to lunch. Looks like it might start to cross thread - and I don't want that to happen.8-o
Di, what do you think I should do?
I am so lookin forward to giving this thing a go!

well, try it all out,

do wehatever you can to fix anything that needs fixing--

and if it is not in perfect working order--
return it and get a reship --

there ya go ---- hahahahah

 

[stroh22]

Di, I did what you suggested I do. I first tried the 510 adapter - all I can say is "Wow!" Great amount of vapor, flavor and TH. Little too much TH for me, but I can adjust that with the type of juice I use. Very impressed with this unit so far.
I was going to put on the 901 but alas, that is the adapter that is bent. I tried to screw the atomizer on, but it only went a little ways before it started to get tough. I didn't want to cross thread the atomizer or adapter so I stopped at that point.
I wanted to thank David for putting in the large carts (not sure what model they are) Bonus! Are these what they call cartomizers? I also don't know how to fill them. It's like they have the condom cover on the end, then you take that off and there seems to be another smaller cover on the inside. Help, I don't know how to use it. I only have experience with the 510 mainly.
My order # is 8533, could you ask David how I can go about getting a replacement adapter for the 901. I don't want to send the whole unit back for a replacement, if I only have an issue with the one piece. I love it and don't want to be without it.
There is one other small issue that I have with the unit, but I think I can fix it myself. The battery seems to be very snug, I had to use a paper clip and push through the vent holes at the bottom in order to push the battery out. Is it possible to just try and sand down the inside of it, in order to get the battery to slide out a little more easier?
Please let me know.
Thanks again for a wonderful unit.

 

[Di]

Di, I did what you suggested I do. I first tried the 510 adapter - all I can say is "Wow!" Great amount of vapor, flavor and TH. Little too much TH for me, but I can adjust that with the type of juice I use. Very impressed with this unit so far.

Good, I am glad that you got it working and that it is performing well with the 510 ---- it is a very good lil atty --


I was going to put on the 901 but alas, that is the adapter that is bent. I tried to screw the atomizer on, but it only went a little ways before it started to get tough. I didn't want to cross thread the atomizer or adapter so I stopped at that point.

Yes, no probs, sounds like the thread may be a lil cockeyed,
I am sure you can get a replacement endcap for that --
just contact customer service on this bit --
explain the problem, and mud will fix you up I am sure -


I wanted to thank David for putting in the large carts (not sure what model they are) Bonus! Are these what they call cartomizers? I also don't know how to fill them. It's like they have the condom cover on the end, then you take that off and there seems to be another smaller cover on the inside. Help, I don't know how to use it. I only have experience with the 510 mainly.

Ok, not sure what we are talking about here, if it is indeed the cartomizers, atty and cartridge all in one ??

if this is the case, they also fit to the 901 thread cap--
they are great, I love em,
and you can fill them in 2 ways, drip up into it from the battery screw on end, or, take out the white cap on the top end, and the inner clear inner ring thingy, and drip into this top end, till moist but not flooded,
then replace the clear and then the white cap, let it sit for 5 minutes - then screw it on and vape away-

if they are not the cartomizers as such - let me know and we will try again with an explanation, haha



My order # is 8533, could you ask David how I can go about getting a replacement adapter for the 901. I don't want to send the whole unit back for a replacement, if I only have an issue with the one piece. I love it and don't want to be without it.

Please contact mud , at customer service and
( give your order number in the subject box)
ask him to organize a replacement for you for this threadcap


There is one other small issue that I have with the unit, but I think I can fix it myself. The battery seems to be very snug, I had to use a paper clip and push through the vent holes at the bottom in order to push the battery out. Is it possible to just try and sand down the inside of it, in order to get the battery to slide out a little more easier?
Please let me know.
Thanks again for a wonderful unit.

I guess you could try that yes, I cannot see it would do any harm --
we have seen and heard that some of the batteries are a lil fatter than others, it is only a tiny bit, but with a snug fit anyway, this lil bit makes it a tight fit -----

we are happy that you like it,

I love mine also --

 

[Dogsbody]

Are these what they call cartomizers? I also don't know how to fill them. It's like they have the condom cover on the end, then you take that off and there seems to be another smaller cover on the inside. Help, I don't know how to use it.

Sorry to snip you, but if they are cartomizers try this method. (don't tell me you haven't seen it either, Di?)

YouTube - Refill Ecig Cartos Quick and Easy (CCFM)

Original thread:
http://www.e-cigarette-forum.com/forum/tips-tricks/67012-refill-cartomizers-quick-easy-video.html

 

[Perpuk]

Stroh,
I think the carts you have are 801s - black whistle tip top and white cover over white cartridge? That is what came with mine.
Pull off the large white "condom", then the tiny wee cover then fill the cartridge with juice (just like you would fill a 510) - takes about 1ml. Then pop the open cartridge into the atomiser.

Di,
Re cartomisers - I can't get them to work at all. The adapter has two small holes in the side of the screw bit, but no hole through the top so no air is getting into the atomiser? A lot of effort produces a bit a flavour and no vapour. I am using Eastmall DVP9 cartomisers. Don't know if it is the adaptor or what.
Any ideas?

 

[Di]

Sorry to snip you, but if they are cartomizers try this method. (don't tell me you haven't seen it either, Di?)

YouTube - Refill Ecig Cartos Quick and Easy (CCFM)

Original thread:
http://www.e-cigarette-forum.com/forum/tips-tricks/67012-refill-cartomizers-quick-easy-video.html

WOW, --- WOW, ---- WOW, ------


NO, I have never seen it done like this,

this is great, so easy and clean and fast ----

I will be trying this method for sure !!!!!!!!!!

Well done --- a brilliant method, thanks for this -----

 

[Di]

Stroh,
I think the carts you have are 801s - black whistle tip top and white cover over white cartridge? That is what came with mine.
Pull off the large white "condom", then the tiny wee cover then fill the cartridge with juice (just like you would fill a 510) - takes about 1ml. Then pop the open cartridge into the atomiser.


Yes, for the 801 large cartridges, this is the correct method ---------


Di,
Re cartomisers - I can't get them to work at all. The adapter has two small holes in the side of the screw bit, but no hole through the top so no air is getting into the atomiser? A lot of effort produces a bit a flavour and no vapour. I am using Eastmall DVP9 cartomisers. Don't know if it is the adaptor or what.
Any ideas?

I know you are clever enough to have tried several cartys on the thread cap to make sure it is not just one defective carty----
so I must assume that you have a defective thread cap --

mine has no hole thru the centre to the atty-
this is good since the juice will not leak into the button section - good news there --

so I am thinking you have a defective thread cap

please contact mud, on customer service and get a replacement 901/carty thread cap --

or get a complete set of the new ones -for free -
when you make your next order --

contact mud here --

eastmallcs@gmail.com

 

[bluesuede]

I can't use cartomizers either. Meant to mention this before and forgot about it since I've been using the 801 attys exclusively. There's no air getting through so it's like trying to suck a golfball through a straw. The airholes in the adapter get blocked when you screw on the carto. If you screw it on tight there's no air at all. Losen it up a little and you get a whisper of vapor with a very, very hard draw. I'm getting muscles in my cheeks.. haha! Tried "finessing" it but it really makes no difference. I've tried it with both EM cartos and those from V4L and there's no difference.

Can't comment on the 510 and 901 since I don't have attys for those.

 

[Di]

I can't use cartomizers either. Meant to mention this before and forgot about it since I've been using the 801 attys exclusively. There's no air getting through so it's like trying to suck a golfball through a straw. The airholes in the adapter get blocked when you screw on the carto. If you screw it on tight there's no air at all. Losen it up a little and you get a whisper of vapor with a very, very hard draw. I'm getting muscles in my cheeks.. haha! Tried "finessing" it but it really makes no difference. I've tried it with both EM cartos and those from V4L and there's no difference.

Can't comment on the 510 and 901 since I don't have attys for those.

nah , should not be like that Blu,
mine just screws on and vapes really good,


get a set of the new thread adapters
free with your next order -- this will solve your problems,

 

[stroh22]

Stroh,
I think the carts you have are 801s - black whistle tip top and white cover over white cartridge? That is what came with mine.
Pull off the large white "condom", then the tiny wee cover then fill the cartridge with juice (just like you would fill a 510) - takes about 1ml. Then pop the open cartridge into the atomiser.

Thank you Perpuk, I do believe those are the cartridges that I do have, I will have to try that. The atomizer seems huge, does it not? Will I get alot of vapor? Looks like a poor mans cigar. So I don't put the other tiny wee cover back on? Does the juice last a long time, with this size cart and atomizer? Sorry, so many questions.

Dogsbody,
Thank you for your information as well, it seems that it's not a cartomizer. My only experience is with the 510.
Do either of you know what the other end caps (adapters??) are for? Which type of atomizers and carts I will need to buy for them? I know the one is for a 901, but the others I don't know. Which in your opinion gives the best vapor and flavor, with no harsh TH? Do you like the cartomizers? What model # are the cartomizers?
Thanks for all of your help,

Dina

 

[DMertz99]

.........Do either of you know what the other end caps (adapters??) are for? Which type of atomizers and carts I will need to buy for them? I know the one is for a 901, but the others I don't know. Which in your opinion gives the best vapor and flavor, with no harsh TH? Do you like the cartomizers? What model # are the cartomizers?
Thanks for all of your help,

Dina

The other adapters are for the DSE801 and M401 attys. The KR808 Cartomizer fits on the 901 atty that you are getting the replacement for.

Edit: The best flavor will be with your 901. The 501 your using now provides the best vapor @ 3.7v. I have the 6v extension and absolutly love the High Voltage 801 attys that come in the 3pak from EM. Good Luck with your new toy.

Donnie

 

[Perpuk]

Will I get alot of vapor? Looks like a poor mans cigar. So I don't put the other tiny wee cover back on? Does the juice last a long time, with this size cart and atomizer? Sorry, so many questions.
Dina

Right. You do not put the tiny wee cover back on. Just pretend it is a large multi-coloured 510 cartridge and the wee cap is like the larger cap on the end of a 510 cart.

The 801 works brilliantly with the indulgence. I am also a 510 person and this is the first time I have tried the 801. It produces lots of smooth vapour and the cart lasts for ages. The only thing I don't much like is the rubbery whistle-tip. I much prefer the larger, harder ones on the 510.

 

[Perpuk]

so I am thinking you have a defective thread cap

Thanks Di. I think that must be the case. I will contact Mud.

 

[Di]

Thanks Di. I think that must be the case. I will contact Mud.

yes, that is the way to go,

thanks, ------

he will take care of your issue for you --

 

[Di]

The other adapters are for the DSE801 and M401 attys. The KR808 Cartomizer fits on the 901 atty that you are getting the replacement for.

Edit: The best flavor will be with your 901. The 501 your using now provides the best vapor @ 3.7v. I have the 6v extension and absolutly love the High Voltage 801 attys that come in the 3pak from EM. Good Luck with your new toy.

Donnie

thanks Donnie,

very well explained, and correctly also ---

thanks for the help and advice to our members

member to member help is always much appreciated..

your advice and experiences shared to each other is unbelievably valuable , you all help each other
and it is good to hear the experience from another member.

 

[Di]

Right. You do not put the tiny wee cover back on. Just pretend it is a large multi-coloured 510 cartridge and the wee cap is like the larger cap on the end of a 510 cart.

The 801 works brilliantly with the indulgence. I am also a 510 person and this is the first time I have tried the 801. It produces lots of smooth vapour and the cart lasts for ages. The only thing I don't much like is the rubbery whistle-tip. I much prefer the larger, harder ones on the 510.

yes, the 801 is my favourite atty,
has been for many many months,

I love the capacity of the juice it holds,
the resulting length of time before needs filling again,
I love the smooth vapor,
the clouds it produces, and the soft and lusciousness of it in my mouth and throat.

and with the 18650 battery,
well, ----
what can I say -- it is a match made in vaping heaven !!

Just color me blissful !!!!!

 

[CartHeadMod]

occasionally the vinyl wrap of a carto will cover the air holes.....before you toss them check to see if you can see the brass edge of the fitting.....if not use a sharp knife to trim it back till you can see the four notches clearly....

 

[Dogsbody]

The other adapters are for the DSE801 and M401 attys. The KR808 Cartomizer fits on the 901 atty that you are getting the replacement for.


Donnie

Just to clarify:

The KR808 cartomizers = DPV9 capsules on the EastMall site.

 

[Di]

occasionally the vinyl wrap of a carto will cover the air holes.....before you toss them check to see if you can see the brass edge of the fitting.....if not use a sharp knife to trim it back till you can see the four notches clearly....

CHM,

thanks for this little gem !!!!!

it is always really helpful when members come accross a potential problem and share it with us all,

it is even more excellent, when they can give us a solution that fixes the problem - as you have -

thankyou ---