What do YOU use to vape Fuzion Vapor's "Unicorn Blood" in?

[randombeta]

Hey guys! My first main post! Woohoo! I've been around a while though.

Anyways I have (like most people) fallen IN LOVE with Unicorn Blood by Fuzion Vapor. This stuff is AMAZING. Hands down my favorite juice of all time and I want it to be my all-day-vape.

That being said I run into the same issue repeatedly where I get amazing flavor/hit for about the first 5 minutes then the carto begins to act like it isn't getting enough juice and eventually the flavor either goes burnt or gets bitter. I can try repriming the carto then it happens again after about 2 pulls. I use a 3.7v Bolt. I've tried a vivi nova, vivi v3, regular cartos, and carto tanks (Texas tuff tank even! But that was a disaster!).

I even ordered more in a 50/50 mix from Shane but noticed no different other than decreased flavor overall.

Currently I've had the most success with the Artemas tank and a 3ohm tripple punched carto but it still goes bad in about 30 minutes of vaping. This stuff is so dang good I would buy about any equipment to be able to vape it trouble free. I'm going crazy!

So my question is - what do YOU use to successfully vape unicorn blood with consistent flavor and hit?

 

[KraKsX]

Raven Tank

 

[randombeta]

Raven Tank

How would this be different than any other tank carto system?

 

[Sun Tzu]

I'm not a huge unicorn blood fan. I didn't want it to go to was so a added a few drops of coffee extract and now it's pretty damn good. I just vape out of a mini vivi nova.

 

[fett701]

Tried vivi nova, kanger t3, stardusts, carto tank, cheap knockoff clearomizer, and no consistent love could be found. I have same issue spectacular one hit and then the nastiest hit ever imagined. Best i got was about 2 tankfuls on a kanger t3 and then it started flooding and was never the same. I have now given up on fuzion vapor in all its forms. YMMV

 

[randombeta]

I'm not a huge unicorn blood fan. I didn't want it to go to was so a added a few drops of coffee extract and now it's pretty damn good. I just vape out of a mini vivi nova.

Idk how you could use a Vivi nova. I've tried probably 5 times and it burns the wick after just a few draws and tastes HORRIBLE. Do you chain vape on the Vivi nova?

 

[lightandmind]

Sounds like you may want to switch it up from silica to something else, or possibly even a dripping atomizer or RBA dripper like the Phoenix that holds about 15 drops or so. I've been putting SS mesh in my tanks with cotton wick threaded through the SS mesh to feed it, it is by far the best thing I've found so far. Since it's heavy on the VG, you'll want to use 325 mesh and a really long wick, (like on Vivi Novas), to better feed it to the coil.

 

[randombeta]

Sounds like you may want to switch it up from silica to something else, or possibly even a dripping atomizer or RBA dripper like the Phoenix that holds about 15 drops or so. I've been putting SS mesh in my tanks with cotton wick threaded through the SS mesh to feed it, it is by far the best thing I've found so far. Since it's heavy on the VG, you'll want to use 325 mesh and a really long wick, (like on Vivi Novas), to better feed it to the coil.

Sounds pretty complicated but I will give it a try. Anyone else have success?

 

[Tom -]

MEGA Smok Tech - Black EGO (type) Dual Coil Cartomizers

 

[molli]

dripping atty. It just doesn't work for me in anything else. Get that burnt taste.

 

[lightandmind]

Sounds pretty complicated but I will give it a try. Anyone else have success?

It's a walk in the park! Tons of info on this sort of thing. Check out THIS vid from Riptrippers when you're ready yo, just substitute the silica for unbleached cotton or unbleach cotton cheesecloth from whole foods, just do NOT forget to let the wick soak in the juice for at least 3 hours or more! The vapor is super clean and UNBELIEVABLE compared to anything else I've tried so far, plus there is usually never any burnt taste like a regular dripping atty, AND something like the Phoenix, (version 1), can be had for only around $10!

 

[guppy]

Idk how you could use a Vivi nova. I've tried probably 5 times and it burns the wick after just a few draws and tastes HORRIBLE. Do you chain vape on the Vivi nova?

Try rebuilding it and put it on a mechanical. Works great after the airflow is upgraded as well. I have my vivi nova on a .7 ohm coil and increased airflow.

 

[Couture]

I got the same thing in my vivi the taste was good for awhile then yuck, the after taste when super nasty. I have it in a DCT tank now and it got rid of the aftertaste but also over all decreased the flavor. I have resorted to dripping

 

[guppy]

here's my rebuilt vivi nova on my popular2
I made the wick hole bigger to fit thicker wicks and used 100% cotton.I don't ever get dry hits this way.

 

[Jeremy Evans]

Idk how you could use a Vivi nova. I've tried probably 5 times and it burns the wick after just a few draws and tastes HORRIBLE. Do you chain vape on the Vivi nova?

My novas are freaking amazing, same flavor out of them as I get out of my RDA. I rewick them with cotton wicks @ 1.3-1.6 ohm and they smoke like a train and never get a dry hit, and I'm not making the wick hole any bigger just a slight spread to them and a small notch in the silicone part to accommodate the cotton. Make sure you have a genuine Nova, not a knockoff. But I would imagine you could rewick a knock off and make it just as good.

 

[Ravalstoney]

I have this issue with all juices and vivi novas. Im done with them, iclears are way better. Never a dry hit and no muted flavor. Just got my order of fuzion juice today. I'll let it steep for a week then I'll vape it in my Penelope RBA.

Sent from my HTC VLE_U using Tapatalk 2

 

[guppy]

My novas are freaking amazing, same flavor out of them as I get out of my RDA. I rewick them with cotton wicks @ 1.3-1.6 ohm and they smoke like a train and never get a dry hit, and I'm not making the wick hole any bigger just a slight spread to them and a small notch in the silicone part to accommodate the cotton. Make sure you have a genuine Nova, not a knockoff. But I would imagine you could rewick a knock off and make it just as good.

the reason I need to increase airflow and making the wick hole bigger is because I have a .7 ohm coil (which is hot) and I need to cool it down.

 

[Koman]

here's my rebuilt vivi nova on my popular2
I made the wick hole bigger to fit thicker wicks and used 100% cotton.I don't ever get dry hits this way.

Wow, that looks nice!

 

[randombeta]

It's a walk in the park! Tons of info on this sort of thing. Check out THIS vid from Riptrippers when you're ready yo, just substitute the silica for unbleached cotton or unbleach cotton cheesecloth from whole foods, just do NOT forget to let the wick soak in the juice for at least 3 hours or more! The vapor is super clean and UNBELIEVABLE compared to anything else I've tried so far, plus there is usually never any burnt taste like a regular dripping atty, AND something like the Phoenix, (version 1), can be had for only around $10!

Do they not just sell Vivi Nova Wicks in pure cotton?

 

[randombeta]

I guess not. This could be a serious moneymaker for someone! Just sell rebuilt wicks with cotton!