What Mech ya sportin today ?

[ccwaters]

Here next to some others.

Left to Right
SubZero/Hybrid, Raven, Tomahawk X, XXX, Hstone, SubZero 510, SubZero X Hybrid.

Raven and Tomahawk X are current winners in height the TX is tiny @ 71mm

 

[Kprthevapr]

@Hightech Redneck I have two Sebone clones now.
They feel good in the hand, the button is recessed, on one the throw is longer, not sure why. The button may give you issues if you have chubby fingers.
The rda that comes with it has 6 non adjustable air holes, its a goon deck, but 24mm goon top caps won't work on it

 

[ccwaters]

So if I was to get only one is copper the way to go


Sent from my iPhone using Tapatalk

I'd go with what you prefer, my preference is copper. If you were blindfolded and I handed you the copper and brass same build and atty you wouldn't tell the difference. Some will say copper 510 strips easy, easier then brass or SS, but I've had no issues with lots of different copper mods.

All preference, and that is how I'd make your choice.

 

[Outcast]

I'd go with what you prefer, my preference is copper. If you were blindfolded and I handed you the copper and brass same build and atty you wouldn't tell the difference. Some will say copper 510 strips easy, easier then brass or SS, but I've had no issues with lots of different copper mods.

All preference, and that is how I'd make your choice.

I'm all about what hits better copper striping is user err


Sent from my iPhone using Tapatalk

 

[ccwaters]

@Hightech Redneck I have two Sebone clones now.
They feel good in the hand, the button is recessed, on one the throw is longer, not sure why. The button may give you issues if you have chubby fingers.
The RDA that comes with it has 6 non adjustable air holes, its a goon deck, but 24mm goon top caps won't work on it

Yup, fat fingered guy here, found the Sebone a bit uncomfortable to use, fingertip has to go inside a bit, and the sides of the switch housing dug into my skin, didn't measure it but the ID of the switch housing must be a little tighter then most, Rogue, 29, SMPL, are all fine for me. Just something about it bugged me using it.

 

[Outcast]

Lol may get all 3 anyhow black brass copper


Sent from my iPhone using Tapatalk

 

[ccwaters]

I'm all about what hits better copper striping is user err


Sent from my iPhone using Tapatalk

If its a good switch design material doesn't make much of a difference, some say they notice it, personally I do not, actual tests I've seen made on mods tends to back up the very little difference theory. If you want to go with science copper is better then stainless or brass.

Conductive Materials or Metal Conductivity - TIBTECH innovations -

 

[Outcast]

If its a good switch design material doesn't make much of a difference, some say they notice it, personally I do not, actual tests I've seen made on mods tends to back up the very little difference theory. If you want to go with science copper is better then stainless or brass.

Conductive Materials or Metal Conductivity - TIBTECH innovations -

Was talking about the xxx 20700 mod ya all got


Sent from my iPhone using Tapatalk

 

[ccwaters]

Yep, I realize that, and everything I've said stands, switch seems quite nice on it, only thing negative I might say is the magnets in it could be a bit weaker, its a good hard hitting mod. They did use the V1 switches in it, but I'm quite happy with it so far.

 

[Outcast]

Yep, I realize that, and everything I've said stands, switch seems quite nice on it, only thing negative I might say is the magnets in it could be a bit weaker, its a good hard hitting mod. They did use the V1 switches in it, but I'm quite happy with it so far.

I would rip out the mags and throw in silver springs anyhow


Sent from my iPhone using Tapatalk

 

[Outcast]

I have some nice black RDA's so prob get the black one kinda looks cool anyhow


Sent from my iPhone using Tapatalk

 

[Bad Ninja]

Nice old school Nemi hybrid!
I have 3 Nemesis clones, brass copper and ss.
Hotcig I think. They are really nice.
Silky smooth threads.
Never did get that anima atty, but had a couple of the 3D squishy hybrid attys for it.

That damn lock ring just kills the Nemesis for me.
And the brass rice pin from hell.
I replaced mine with pieces of $ .99 store drill bits.

 

[ccwaters]

LOL, definitely some truth in that post, not fond of the locking ring either!

About 8 months ago VapeRev had authentic 3D for $15 so I bought one, the clone I had was terrible, authentic on an Hcigar tube. Never got around to polishing it to match the tube, probably because I'm not feeling any love for the 3D

 

[Outcast]

Nice old school Nemi hybrid!
I have 3 Nemesis clones, brass copper and ss.
Hotcig I think. They are really nice.
Silky smooth threads.
Never did get that anima atty, but had a couple of the 3D squishy hybrid attys for it.

That damn lock ring just kills the Nemesis for me.
And the brass rice pin from hell.
I replaced mine with pieces of $ .99 store drill bits.

Ya that small pin sucks herd a tooth pick would work


Sent from my iPhone using Tapatalk

 

[Bad Ninja]

Ya that small pin sucks herd a tooth pick would work


Sent from my iPhone using Tapatalk

The brass ones are too soft and tend to mar.
They also vanish on tile or carpet.
The drill-bit bits can be found with a magnet.

 

[ccwaters]

27mm RDA doesn't look half bad on the XXX

 

[Outcast]

Is it wrong to say I like the brass clone over my real one haha


Sent from my iPhone using Tapatalk

 

[Bad Ninja]

Haha that brass one hits like a sledgehammer.

 

[Outcast]

Now what can I get for my real cb.. him............ trade time I think


Sent from my iPhone using Tapatalk

 

[Outcast]

Rocking this today with a simple 24g n80 parallel build at .42ohms


Sent from my iPhone using Tapatalk