RDA What ohm coil should I use

[Wannabecloudchaser]

I've been vaping for a while now but I'm new to the rda's I'm still in the process of learning to build so whilst I'm still learning I'm going to buy some pre built coils until I get better I have a 200w box mod and want use the highest possible watts I can

 

[Izan]

Hi and welcome,
Which RDA are you building?
What kind of wire will you be using?
Wick?
What is the 200Watt box mod you have?
What nic level are you using now?
What device are you using now?

Cheers
I

 

[Wannabecloudchaser]

Royal hunter rda with 28 gauge wire with Japanese organic cotton on a rx200 and 0-6mg juice

 

[tpedwards]

Just experiment my friend, to me the wattage is not important. Build your coils and adjust your power to your personal preference.

 

[Kprthevapr]

Royal hunter rda with 28 gauge wire with Japanese organic cotton on a rx200 and 0-6mg juice

Try 26 or 24 gauge wire.
I build most of my rdas with 26, 5 wraps on 2.5mm screwdriver, comes out around .32

 

[Baditude]

Just experiment my friend, to me the wattage is not important. Build your coils and adjust your power to your personal preference.

^^^ This.

No one can tell you what will work best for you. Only through trial and error will you find that out.

Try a couple different gauges of wire to see which one works out best for you, maybe some 28 and 24 gauge. Use the steam engine coil calculator to see how many wraps it takes for the coil diameter and target resistance you want. And practice, vape, and practice and vape some more.

It took me a good year of experimentation to find my present sweet spot. 0.6 ohm dual coils of 28 gauge 3mm diameter vaped between 30 - 40 watts on my RX200. I like the larger coil diameter because its easier to wick and I can use more wick in the coil. I'm thinking about trying some 24 gauge sometime to see if a few more wraps and increased surface area improves my current vape.