what vivi nova do i have

Status
Not open for further replies.

TBinAZ

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2012
1,628
1,340
Mesa
Or, if you have the v1, you will have long wicks and 2 air holes on the side of the lower base, and not at the 510 threads like the newer versions. Anything other than the v1 is interchangeable, but personally I would suggest the long wick atty heads. The v1 top cap has a different design where it contacts the top of the atty head, so unless you're handy with a measurement device and dremel, it could be a task to match something up for a v1 unless it's firmly stated in the product details. A quick call to the vendor would clear up any doubt.
 

CHUCKmfnNORRIS

Full Member
Verified Member
Apr 22, 2010
31
2
CT
here is a quick pic i just took

clerer-1.jpg
 

TBinAZ

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2012
1,628
1,340
Mesa
Are you really Chuck Norris? If so, you would have seen the link I put in my last post. ;)

There may be slightly cheaper out there, but not by much, and this is from a mainstream outfit. Don't miss the 5% VIP discount.

not looking for anything complicated. where do you suggest to get replacement heads attys?
 

TBinAZ

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2012
1,628
1,340
Mesa
Looks like a bit of confusion here. You will be good using the v2.5 heads like in the link I sent earlier. Am I missing something?

im just looking to buy ones that fit my v2's. i have 3 of them that i got at my local shop, they dont carry the 2.5's yet, and they dont have replacement attys either. i just need to find a good place to get them from.
 

Jett1980s

Senior Member
ECF Veteran
Verified Member
Sep 4, 2012
119
48
39
Mount Vapeus
There has been some variations made to the Vivi Nova, I don't know why, as far as it goes long wicks are considers V2.5, when V2.5 first came out they were advertised with air holes around the bottom cap instead of it being on the connection, but looking at some videos and my friend purchased one there were no air holes on the sides of the bottom cap, I don't know if this was done as a cost reduction scheme or to sell off whatever was left of the old V2 bottom caps, my friend received an email saying that the designed changed due to certain reasons which was never made clear. To me it just seemed like they were trying to get rid of the remaining V2 bottom caps, some come with air holes at sides of the bottom caps, others remain as they were like on the V2s, the only big difference are the wicks, that's pretty much all I have on Vivi Novas.
 
Status
Not open for further replies.

Users who are viewing this thread