What voltage are you vaping at?

[Lenmerlo]

Just curious I had a twist but now have a full fledged VV...i am currently vaping at 4.4 How about you? Why?

 

[grandmato5]

I vape at 3.4 VTs- 4.8 VTs depending upon which APV I'm using with which ohm atty or carto or clearo I'm using along with which juice I'm using.

 

[DFNDR]

7.4 at just over 21w at the moment.


Sent from my iPhone using Tapatalk

 

[T41CK]

7.4.... Holy moly burn juice much

Im vaping at 3.6 at right now out of a stardust

 

[DFNDR]

7.4.... Holy moly burn juice much

No. I find that the juice I vape tastes the best at that voltage. Plus I only run 7.4 during the morning to mid afternoon hrs. I also run 6v and other ranges with my provari. This juice is just awesome running that hot.


Sent from my iPhone using Tapatalk

 

[yzer]

I'm using a semi-regulated 3.7 V APV with 2.0 ohm LR single coil cartos most of the time. That's about 6.85 watts. I also use 1.7 ohm LR single coil cartos for 8.0 watts but find that too warm for my taste most of the time. I use a very high percentage VG juice and gets massive amounts of vapor with either carto.

 

[Idaholandho]

I'm presently at 3.8 on a low resistance Stardust filled with steeped MOV CountRY4 with a Twist. Big hits, not much throat but great taste.

 

[Jarski44]

I have no idea. I got a Zmax for Christmas, usually set between 6.0 and 8.0 watts. Vivi Nova is reading 2.6 ohms and currently at 7.0 watts. Seems to be my sweet spot for Gorilla Juice.

 

[DudeMcBacon]

I just got a eGo-VV and usually have it set for somewhere inbetween 3.3-4.5V. I don't know if it's the ejuice I'm using or something else but it seems like it burns my throat if I go any higher. Anyone have any suggestions?

 

[melloyello]

I just got a eGo-VV and usually have it set for somewhere inbetween 3.3-4.5V. I don't know if it's the ejuice I'm using or something else but it seems like it burns my throat if I go any higher. Anyone have any suggestions?

the term "voltage" can be little bit misleading. if im using a LR cartomizer, they run (and taste) the best at about 3.7-4.2 volts (depepending on what juice im using). typically fruity flavors taste best just over 4v with a LR cartomizer.

now...if i use a vivi nova or a clearomizer, the same 3.7-4.2 volts can be used on a 2.4ohm clearo. if i had a cartomizer that was 2.4ohm, i would use at least 4.5volts.

5 volts with a 3ohm carto gives VERY close to the same vape as 3.7volts with a 2.0ohm caromizer.

if its burning your throat, you either have a wicking issue (are you using a clearomizer, carto or a tank?) or the voltage is too high. dial it down until it tastes right, then leave it be.

i hope i didnt confuse you more.

 

[DFNDR]

the term "voltage" can be little bit misleading. if im using a LR cartomizer, they run (and taste) the best at about 3.7-4.2 volts (depepending on what juice im using). typically fruity flavors taste best just over 4v with a LR cartomizer.

now...if i use a vivi nova or a clearomizer, the same 3.7-4.2 volts can be used on a 2.4ohm clearo. if i had a cartomizer that was 2.4ohm, i would use at least 4.5volts.

5 volts with a 3ohm carto gives VERY close to the same vape as 3.7volts with a 2.0ohm caromizer.

if its burning your throat, you either have a wicking issue (are you using a clearomizer, carto or a tank?) or the voltage is too high. dial it down until it tastes right, then leave it be.

i hope i didnt confuse you more.

Another thing to look at is the wattage you're vaping at.

I just changed out my batteries to 6v. With a 2.5 ohm carto I'm running 14.4 watts.

6x6/2.5=14.4

Volt x volt divided by ohm gives you your watts.


Sent from my iPhone using Tapatalk

 

[ironlung408]

Looking through the new members stickies and wondering..

Has the relationship between different components and electrical values been catalogued somewhere around here so I could flip through it without asking a bunch of individual questions?

Just wondering, I've got a variable voltage on the way and trying to figure this stuff out.

 

[ScytheSVK]

4.5 V Vivi is with 2.4 head

 

[MDV39]

4.5 V with a 2.5 ohm Kanger T3 on my VAMO

 

[alank]

3.3 volts 1.8 Ohms I can go to 6 but yuck, high voltage just ain't me.

 

[subversive]

5 volts with a 3 ohm carto. There is a vaping power level chart listed in the second post of this thread.

 

[denali_41]

around 3.7 with a 2.2 kanger T3 or kanger 2.8 carto..any hotter and it get miserable for me ,,and really burns through the juice i might add

 

[mse12]

8 watts...with a vamo...I let it do the math!

 

[denali_41]

Just curious I had a twist but now have a full fledged VV...i am currently vaping at 4.4 How about you? Why?

BTW...He is asking about volts,not watts !!!

please respond accordingly

 

[DeareN]

I prefer to use Variable Power (Watts), I set it to 7.5-8.5 E Watts and I dont care about the resistance of my atty anymore. Many new mods have the option of VW instead of VV and I guess thats the way to go.