What voltage/ atty resistance do you like best? doing research for battery mod.

[Gigaah]

What battery are you using and what resistance atty are you the most happy with?
If you happen to actually know the real wattage of what your using that would be great. That would require you knowing what the actual voltage of your battery is WHILE YOUR SMOKING IT. I'd have to look around to find it again but I recall seeing..dr vapor maybe? testing some common batteries. Most of them dropped to 3.4-3.3v underload but I'll check on it.

Well barring all the technical voltage info. If you can let me know what battery(s) your using and what resistance atty you prefer with it I would find it very usefull.

I'm attempting to make a 510 compatible battery with aproximatly the dimensions of a standard 510 battery or maybe a mega 510 battery but able to pull a solid 10 watts out of it..possibly more.
I'm currently shooting for 7 to 9 watts(9 watts fully charged battery 7 watts when it goes blinky).
However I wanted to ask the community before I got too far into it.

You know for the discrete public vapor that wants no compromises(me)(other than battery life..need PCC).

ANY input is appreciated!

 

[Gummy Bear]

For what it's worth,,,,,,,
4.4v on a 3ohm C2 carto does it for me.
This is the actual voltage going to the atty.
I use a 3600 mAh 18650 3.7v boosted to the 4.4 on one mod.
and a 2100 mAh 7.4v camcorder battery regulated down to the 4.4 with PWM on another.

 

[pailpoe]

For me, 1,7v and 0,17 Ohms with a ULRA atomizer

 

[olwildbill]

For me I use a 18650 2400 mah TF with a 306LR Atty

 

[Gigaah]

6.5watts
17 watts(yikes)
9 watts (roughly)

 

[Switched]

'tween 6 and 8 watts

 

[Gummy Bear]

@Gigaah,
You will of course find out that there will be no consensus, It's just like food, everybody likes something different.


But if you were to ask what we would like to have in a battery that's easy.
We would all like an 10C, 5000 mAh, precisely adjustable battery (from 3 to 6 volts) in the AAA format. That doesn't explode, get hot or smell bad. oh yea and lasts 10 years.

Edit: and only cost $5.00

 

[Java_Az]

For me it is around 8 to 9 watts depending on the juice. Variable voltage is what i prefer. That way no matter what atomizer or cartomizer i slap on the PV, I can dial it to perfection.

 

[dspin]

3.7 v - atty 1.5 306,510,901 for now. I need a VV to dial it in, then I will be happy

 

[wv2win]

BE112/801 atty with 3.0 resistence on a 5 volt PV. Great TH without the burning.