I should be receiving one on Tuesday. It will be my 1st rba. I am so tired of my draw getting really tight on day 2 or 3 of my cartomizers. Now I am wondering what the draw will be like on the AGA T2.
What's the draw like on the AGA T2?
- Thread starter Dana A
- Start date
- th_trl_thread_readers 0
- Status
Loose draw, i was used to the vivi nova draw, but i got used to it...u can make it tighter by putting a piece of tape over the hole and sticking a pin through it
Depends a little. First one I got was quite tight out of the box. Next one was much better. It's not big deal, tho. If it's too tight for your liking, you can easily enlarge the air intake. The cap is not too thick, so all I've had to do is to insert the tip of a round file and spin it a little until it's how I like it.
IMO, the stock draw on the AGA-T2 is a bit tight. I've had several of them, and I've found that I like the air hole drilled out to 1.2mm. They are very easy to drill.
^yep ^^yep ^^^nope
bit tight, 1.2mm good, ream it out if you don't have a drill bit (3/64" works ok too)
bit tight, 1.2mm good, ream it out if you don't have a drill bit (3/64" works ok too)
- Status
Similar threads
