when do i know when this cartomizer is getting hot?

[SirKillawatt]

I got the vision eGo CE4+ V2 clearomizer and im curious when to know when it gets "too hot". i know other ecig atomizers and cartos get hot but i can't feel it with this one. also, can i have it upside down, say if it was in my pocjet and slid, and not worry about it spilling out of the end i suck on?

 

[X P3 Flight Engineer]

The beauty of the Vision eGo is that it does not leak. (even upside down)
Juices with high acid content may crack the polycarbonate tank, and that may cause it to leak.
They may start to leak after a month or so of use. (who cares, it worked for a month)
They do get warm sometimes with use. If they do, give it a rest.

The draw sometimes tightens up on them and you have to loosen the mouthpiece to allow some air into the tank.

Relax, Enjoy!

 

[sailorman]

According to the manuacturer, the CE4+ is made from a different plastic that's not supposed to crack from juice like the older ones. Time will tell, but they're the same company that makes the Fluxos, so they do know how to do it if they want to.

 

[X P3 Flight Engineer]

According to the manuacturer, the CE4+ is made from a different plastic that's not supposed to crack from juice like the older ones. Time will tell, but they're the same company that makes the Fluxos, so they do know how to do it if they want to.

That is good news indeed! Thanks for letting me know.

 

[PittBoss]

According to the manuacturer, the CE4+ is made from a different plastic that's not supposed to crack from juice like the older ones. Time will tell, but they're the same company that makes the Fluxos, so they do know how to do it if they want to.

Well that is a '+', thanks for that tidbit!

 

[SirKillawatt]

another question, there are two threads towards the top of the clearo, and they always seem to be saturated with juice. am i supposed to keep them saturated even when the liquid line is below that point, or what? i don't want to ruin this product, its amazing.

 

[sailorman]

Sorry to hear you're so disappointed with your CE4.

 

[X P3 Flight Engineer]

another question, there are two threads towards the top of the clearo, and they always seem to be saturated with juice. am i supposed to keep them saturated even when the liquid line is below that point, or what? i don't want to ruin this product, its amazing.

Those are the wicks and they should always be wet.
If they get dry they will send a GawdAwful taste to you to remind you. Lol

 

[SirKillawatt]

Those are the wicks and they should always be wet.
If they get dry they will send a GawdAwful taste to you to remind you. Lol

alright, makes sense. i mean, idk if it's the liquid or not, but the vape kinda taste a bit burny and im so worried im doing something wrong. it's giving me that stingy throat hit as well, so i have no idea wtf i'm doing wrong.

 

[X P3 Flight Engineer]

alright, makes sense. i mean, idk if it's the liquid or not, but the vape kinda taste a bit burny and im so worried im doing something wrong. it's giving me that stingy throat hit as well, so i have no idea wtf i'm doing wrong.

Keep your wick wet. Some thicker darker liquids do not wick as fast as thinner ones. You may want to try a thinner juice, clear juice if you have one. Don't be afraid to experiment.

 

[FisherPal]

Whenever you get that 'burny taste' just give it a tilt so refresh the wicks and you should be good to go. Also don't let the tank get much lower than about a third of the way before refilling. Nothing horrible bad will happen if you do let it go down farther than that but you'll get a lot more dry hits so might as well top it up.

 

[yiddleboge6]

The new ones have longer wicks so you shouldn't have to tilt them quite as often and should be able to let the juice go a little lower than that

 

[SirKillawatt]

alright, thanks guys. it may just be the flavor im using right now as well. once i get a flavor im used to i can really make sure that im not doing something wrong