Is there any where in the US I can get a wire welder or wire zapper to join nr-r wire?
Where can I get a wire welder or zaper in the US
- Thread starter JeffvapesGG
- Start date
- th_trl_thread_readers 0
- Status
I know theres a site in the Uk, but I don't really like ordering internationally
Not sure where it's shipping from but it looks really good and has good review. I've been in contact with the manufacturer to ask where it's coming from, hopefully they'll get back to me soon. I'm def going to order this one regardless
http://www.ideasproyectadas.net/wirewelder
Sent from my iPhone using Tapatalk
The domain is registered to an address in Queensland, Australia. Not always an indicator, but for a small site like this one, I'd give it an 80% chance of accuracy.
I just ordered one tonight. I'll let you know how it turns out.
Subscribing to this thread, been thinking about getting a zapper because I'm too lazy to make one, lol.
Edited to add, saw that the shipping was free by Sepomex, that's the Mexican national postal service (Servicio Postal Mexicano)
Edited to add, saw that the shipping was free by Sepomex, that's the Mexican national postal service (Servicio Postal Mexicano)
Last edited:
I just got my tracking# for the Wire Welder V2. Once you get sent an email with your WWV2 serial# you can go here to get your tracking # when it ships. Tracking order
Here's the thread at Vapor Wall for the WWV2. www.vaporwall.com • Login
Looks like it's going to be a great device, looking forward to getting it.
Here's the thread at Vapor Wall for the WWV2. www.vaporwall.com • Login
Looks like it's going to be a great device, looking forward to getting it.
Haven't got a tracking number of order conformation yet but I did only order yesterday. What is the delivery timeframe on yours?
Sent from my iPhone using Tapatalk
Here is some information I got from Ariel_MX .
Yes, I know almost everything I was part of the V1 project with seth83, I couldn't contine in the project due time reasons.
This what I wrote some days ago at VaporWall forum about V2:
Let me tell you guys, you won't regret of buying a Wire Welder V2, I was able to play with the Wire Welder V2 prototype and commented with seth83 the new features and improvements, you will see by yourself when you receive it, it is a wonderful device.
I know some people thing it is on the expensive side, but believe me, seth83 is getting a very low profit margin (or not profit at all), getting most of the electronic parts, the design of the circuit board, soldering, assembling, programming the micro controller, testing, etc. is not an easy task. A lot of work and effort is involved (I was part of the project of the V1), all the soldering is made by hand with a microscope by seth83, even the very small components, as the battery charger, micro controller, and so on.
Some of the nice features:
Integrated battery charger vía a micro usb port, so you do not have to worry to take apart the device to charge the battery, and since it uses a 18650 Li-Ion battery, you will not have to recharge the battery often.
The integrated charger has indicator leds, that let you know when the device is connected to the current, when the battery is charging and when the battery is totally charged.
The device indicates the current voltage of battery.
Selectable charging voltage, so you can play with different charging voltages for different wire gauges / alloys.
Progress of voltage charging is shown on the screen, so if you configured the device to charge to (for example) 50v, the device will show on the screen the progress of charge until it reaches the configured voltage: 1, 3 , 10, 23... ...50v
New positive wire fixating: very easy to fix the positive wire.
New negative alligator clip: very easy to fix the negative wire.
Integrated ohm-meter: you can check the resistance of the wire before welding and you can check the resistance of the atomizer, as it has an integrated 510 connector, the device automatically detects when an atomizer is connected.
New battery holder.
New internal wiring design.
And a lot of new an cool features.
You only need to add a 18650 battery (no nipple top) and a Mini USB cable to charge the battery, after installing the battery you need to connect the Wire Welder V2 to an USB port to activate the charger's PCB and to start it the first time.
This is the User's guid I wrote for the V1, it could give you an idea:
https://docs.google.com/document/d/1...it?usp=sharing
And this one is my modedd V1 (I added a 510 connector to check atomizer's resitance, V2 includes this connector):
If you need assistance to buy a V2, let me know, I can tell to seth83 to contact you by e-mail or via facebook, I think he is finishing second batch.
By the way, V2 looks much better.
His Facebook account is:
https://www.facebook.com/profile.php?id=100001361142307
I do not sell it, but my facebook is: https://www.facebook.com/arfalconi
And this is the thread at Vapor Wall, you can contact seth83 there also:
http://www.vaporwall.com/forum/viewt...hp?f=10&t=6460
Yes, I know almost everything I was part of the V1 project with seth83, I couldn't contine in the project due time reasons.
This what I wrote some days ago at VaporWall forum about V2:
Let me tell you guys, you won't regret of buying a Wire Welder V2, I was able to play with the Wire Welder V2 prototype and commented with seth83 the new features and improvements, you will see by yourself when you receive it, it is a wonderful device.
I know some people thing it is on the expensive side, but believe me, seth83 is getting a very low profit margin (or not profit at all), getting most of the electronic parts, the design of the circuit board, soldering, assembling, programming the micro controller, testing, etc. is not an easy task. A lot of work and effort is involved (I was part of the project of the V1), all the soldering is made by hand with a microscope by seth83, even the very small components, as the battery charger, micro controller, and so on.
Some of the nice features:
Integrated battery charger vía a micro usb port, so you do not have to worry to take apart the device to charge the battery, and since it uses a 18650 Li-Ion battery, you will not have to recharge the battery often.
The integrated charger has indicator leds, that let you know when the device is connected to the current, when the battery is charging and when the battery is totally charged.
The device indicates the current voltage of battery.
Selectable charging voltage, so you can play with different charging voltages for different wire gauges / alloys.
Progress of voltage charging is shown on the screen, so if you configured the device to charge to (for example) 50v, the device will show on the screen the progress of charge until it reaches the configured voltage: 1, 3 , 10, 23... ...50v
New positive wire fixating: very easy to fix the positive wire.
New negative alligator clip: very easy to fix the negative wire.
Integrated ohm-meter: you can check the resistance of the wire before welding and you can check the resistance of the atomizer, as it has an integrated 510 connector, the device automatically detects when an atomizer is connected.
New battery holder.
New internal wiring design.
And a lot of new an cool features.
You only need to add a 18650 battery (no nipple top) and a Mini USB cable to charge the battery, after installing the battery you need to connect the Wire Welder V2 to an USB port to activate the charger's PCB and to start it the first time.
This is the User's guid I wrote for the V1, it could give you an idea:
https://docs.google.com/document/d/1...it?usp=sharing
And this one is my modedd V1 (I added a 510 connector to check atomizer's resitance, V2 includes this connector):
If you need assistance to buy a V2, let me know, I can tell to seth83 to contact you by e-mail or via facebook, I think he is finishing second batch.
By the way, V2 looks much better.
His Facebook account is:
https://www.facebook.com/profile.php?id=100001361142307
I do not sell it, but my facebook is: https://www.facebook.com/arfalconi
And this is the thread at Vapor Wall, you can contact seth83 there also:
http://www.vaporwall.com/forum/viewt...hp?f=10&t=6460
I ordered approx. a month ago, knowing it would be a while as he was working on them. On the 3rd of Dec. I got an email asking to verify address and nickname, also giving me my serial#, I imagine you'll get that also. The tracking# was just entered into the system yesterday, and at this point does'nt really tell me much.
I really hope it's sooner than a month. The email I got back from him before I ordered said he had some in stock ready to go. Might have just said that to get me all excited. ;p
I really hope it's sooner than a month. The email I got back from him before I ordered said he had some in stock ready to go. Might have just said that to get me all excited. ;p
Like I said, I ordered knowing at the time he was still working on them. If you order now, one will already be made or be close to being finished already. I don't think there's much to worry about, as far as how well the Mexican tracking system works, I guess we'll see.
These are taking a while to arrive, but I think it's just a combination of the Mexican Postal service and the Holiday glut of packages. Should be here soon.
Not sure what's going on either but ordered mine on the 12th and still no tracking #
Yeah, Seems to be slow mail and not so good tracking out of mexico, but on the good side, according to the thread on vaporwall, some people are starting to recieve their welders.
- Status
Similar threads
