Which coil resistance to choose

[bassilio]

Hi, I have a kanger mt3s and there is 4 resistance options when buying new coils, which one produces best vapor with an ego t battery without the burn smell

 

[suspectK]

I'd recommend 2-2.4 ohms with clearos. I wouldn't go above with a carto. If you get into variable voltage, you can choose with your own preference.. temperature and battery life.

 

[bassilio]

Thank you I am going to order the 2.2

 

[suspectK]

You have ego t...just that..nothing else with the name?

 

[crxess]

2.2ohm should be perfect. A touch warm of full charge and slightly cool a the end of charge but really consistent over all.(assuming true 3.3v regulated Ego).
A clone may be a bit hotter on full charge but will gradually smooth out.

 

[InTheShade]

Personally on a 3.3 (or a 3.7 for that matter) volt device I would go with a 1.8ohm if it's available. That puts you between 5 1/2 to 7 1/2 watts on a fresh charge which should give you plenty of vapor and flavor.

My personal opinion and experience is all...

 

[Archimedes]

Personally on a 3.3 (or a 3.7 for that matter) volt device I would go with a 1.8ohm if it's available. That puts you between 5 1/2 to 7 1/2 watts on a fresh charge which should give you plenty of vapor and flavor.

My personal opinion and experience is all...

Couldn't have said it better myself. 7 1/2 watts is usually close to perfect on stock clearo atomizers.

In the future if you were looking for a slight upgrade, I can vouch for eGo C-Twists being great because you can fine tune the voltage to the atomizer you have and practically not worry about which resistance to buy.