Why does my protank II taste so bad?
- Thread starter ChelsB
- Start date
- th_trl_thread_readers 0
- Status
What kind of mod are you using it on? What do you have it set at?
I'm actually just using it on a simple vision spinner pen-type device, which is currently set at the max, 4.8
Sent from my iPhone using Tapatalk
What mod (battery) are you using it on? What coils? What settings? What ration of liquid?
The PT II is an older low wattage tank. If you are using the newer cotton wicked coils, you may have to swap in a new coil or re-wick the old one because once it burns, it's going to stay that way. The older silica wicks can be dry burned and cleaned to some extent.
It is possible you tried too high a setting as these are more of a 10 watt or lower type of tank. Very high VG liquids may not wick well.
The PT II is an older low wattage tank. If you are using the newer cotton wicked coils, you may have to swap in a new coil or re-wick the old one because once it burns, it's going to stay that way. The older silica wicks can be dry burned and cleaned to some extent.
It is possible you tried too high a setting as these are more of a 10 watt or lower type of tank. Very high VG liquids may not wick well.
Do not remove the silicon ring. That creates a seal with the chimney and keeps it from leaking.
Also, that does not look like a authentic Kanger coil.
Also, that does not look like a authentic Kanger coil.
Could be a bum coil. Sometimes the premade factory coils are bad, it happens. Do you have a way to check the resistance of the coil to make sure it's what it's supposed to be?
Unfortunately it still tastes awful even after lowering the volts.
Sent from my iPhone using Tapatalk
You have burnt the wick from to much voltage. Replace the coil head and start at 3 volts and go up until you like it. It is junk. Keep it so you can rebuild it
The PTII was the last tank I used. I got tired of buying coils and didn't like the flavor.
As people progress, they find their comfort level, for me, I haven't used a tank in almost three years. I love to rebuild my rdas the way I like for them to hit.
I sub ohm at .25 with a Goon/Rose Finch mech mod lol.
Even after replacing the coil it STILL tastes awful! Should I just toss this in the trash?
Sent from my iPhone using Tapatalk
I have one on my Provari right now and the taste isn't that great no matter what I do, guess I've become an RTA fan
sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk
sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk
This was a brand new tank, which was why I was asking, otherwise I would've tossed it
Sent from my iPhone using Tapatalk
I have a Genesis atty that is exactly the same. It used to be fine but now just a horrible burnt taste. I have tried cleaning and sterilising it (fully stripped down), new juice, different/new coil, new and different wicking materials. I must have rebuilt it about 15 times trying different things but nothing changes. Still get a horrible taste.
Some one suggested to fit new O-rings but I can't as I don't have any spares that will fit, but I don't see how the o-rings could cause this as all they are doing is holding on the top cap. It's ....ing weird.
Any suggestions would be great [emoji173]️️
Sent from my iPhone using Tapatalk
Some one suggested to fit new O-rings but I can't as I don't have any spares that will fit, but I don't see how the o-rings could cause this as all they are doing is holding on the top cap. It's ....ing weird.
Any suggestions would be great [emoji173]️️
Sent from my iPhone using Tapatalk
Hopefully, someone will help us figure it out, Phil P. I have had one of these before and it had no problems so I am totally perplexed. Even after changing the coil and juice, the flavor isn't right.
Sent from my iPhone using Tapatalk
- Status
Similar threads
