ZFM Zero Filler Mod

[Daifne]

Just got mine as well. I've just tried the H cut one so far, but WOW! I'm using the 510 mega attys and carts on my Tornado, so the included carts aren't really necessary for me. I just cut a straw, filled and popped it in.

Great vapor, great taste, not leaking like I was getting from the other mods I tried and from the standard filler. Haven't gone through a full cart yet, but it seems like this is the answer that I've been looking for.

Thank you!

P.S. How about selling refills with a choice of cuts and no carts? I'd do my own, but the arthritis in my fingers make it very difficult to cut them myself.

 

[MonsterKenny]

hope i get mine soon, i am eager to try these out. i made some but i get some flooding. using a pinch of batting for the plug and its working great so far.

 

[simmi5]

Has ANYONE figured out how to do this for the 801? I still can't figure it out or get one to fit properly.

 

[SCOTTYBALLS]

P.S. How about selling refills with a choice of cuts and no carts? I'd do my own, but the arthritis in my fingers make it very difficult to cut them myself.

Ask and u shall receive packs of 10 now available

Scotty

 

[MonsterKenny]

Ask and u shall receive packs of 10 now available

Scotty

awesome!

 

[DeXTeR]

Thanks Scotty. I'm lazy as hell so I just ordered a set lol. Can't wait to check it out as I chain vape all day while at the PC. I have a Chuck coming in as soon as it's born that is set up for a 510 so I think this will be a must.

I also have a 901 atty that i use on my KR8 manual batts to drip. Any chances you are going to be selling the 901 carts done this way ?

 

[Daifne]

Ask and u shall receive packs of 10 now available

Scotty

Great big grin and a hug sent out to you! Thank you Scotty.

 

[DeXTeR]

Just noticed you are in Greenville, SC. Might have to stop in next time I go up to see family and pick up an order or 2 once you start / if you start making these for other atty's.

 

[MonsterKenny]

Just got mine! They rock. Perfection. Ill be ordering spare plugs. A+ to you!

 

[Scottbee]

Great big grin and a hug sent out to you! Thank you Scotty.

It would appear that about 40% of all vaporers live in Wisconsin....

Bizarre.

 

[DC2]

It would appear that about 40% of all vaporers live in Wisconsin....

Bizarre.

And it's only getting worse!!

For the love of God, what is it with all the Wisconsin folk around here?

1) Everybody and their mother is moving to Wisconsin
2) People in Wisconsin have little else to do but smoke
3) People in Wisconsin like to show off that they live there
4) Some other answer I haven't thought of

Should I make this a poll?


Disclaimer: No Wisconsonians were harmed in the making of this post

 

[Scottbee]

"Disclaimer: No Wisconsonians were harmed in the making of this post"

Are you sure? We're very fragile...

 

[SCOTTYBALLS]

LOL... I did not think about it but I do send out allot of my orders there... do they grow allot of tobacco there or something?

 

[Scottbee]

Wisconsin is all about vices. If you don't have any when you move here, we issue you some.

Luckily I came here from Texas via California. I already had a big ole box of `em.

 

[SCOTTYBALLS]

Wisconsin is all about vices. If you don't have any when you move here, we issue you some.

Luckily I came here from Texas via California. I already had a big ole box of `em.

Understood...

 

[MorbidMetal]

I'm a little hurt.

 

[Daifne]

You are? What about me? It was my post that instigated this Wisconsin thing... ;-)

 

[wave42]

Okay, I tried this tonight out of sheer boredom. I had a set of silicone mini-bundt pans that I've never used and figured I'd sacrifice them for the cause. After examining them, I determined the "tube" section was the thinnest and most flexible. It's thicker than the silicone end caps but still flexible enough for the bridge on the atty to press up on it to open the slit I made in the center. I made three caps, one each for a 510, 901 and 801. The 510 was the easiest of the three. I did have to use a slightly thicker section for the 801 because of the size of the opening. All three are working and none are leaking. I'll keep them on through a few refills

 

[Thornak]

whats the story on air lock with this mod? also, how does the liquid wick up to the top? Do you have to keep turning it upside down to wet the part of the bridge that pokes through the membrane?

 

[SCOTTYBALLS]

whats the story on air lock with this mod? also, how does the liquid wick up to the top? Do you have to keep turning it upside down to wet the part of the bridge that pokes through the membrane?

Vapor lock was a problem when we were using thicker plugs and smaller holes. I think it also had something to do with suface tension of the liquid trying to go threw a small hole... balance seems to be the key.. as far as turning it upside down to wet the bridge? No there is no filler the liquid will splash around just by putting it up to your mouth to take a drag.. however if you only vape while looking at stars then it might be a problem