eleaf istick TC60W, Variable Watt/Temperature Control Kit in Black
The newest member to the popular istick family, the Eleaf iStick TC60W is a Variable Wattage and Temperature Control mod.
A chief benefit of Temperature Control is the ability to avoid burnt or "dry hits" while vaping - this can result from over-heating the coil, or from heating a coil that is dry, due to a low e-liquid level inside the atomizer. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200) and Titanium wire. In Variable Wattage mode, the iStick TC60W has a 60 watt maximum output.
In addition, the iStick TC60W does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery, so you can quickly swap out a drained battery for a freshly charged one as needed. The iStick TC60W allows for easy on-board charging with the included Micro USB charge cable.
This latest iStick sports a different look, with the atomizer mounted at the center top of the device, rather than at one end along the top. The iStick TC60W retains all the key features the series is beloved for: a small size, an ergonomic design with rounded edges, and user-friendly operation.
The Eleaf iStick TC60W Kit is an excellent, budget-friendly introduction to Temperature Control vaping! Its compact, ergonomic design makes this device very comfortable in the hand. And, with a removable battery, it means you never have to wait for your battery to charge - just swap out a drained battery for a freshly-charged one. The included Melo 2 atomizer is a perfect match for the iStick TC60W. The included coil heads allow vapers to experience Variable Wattage and Temperature Control vaping as easily as changing out a coil head. With its top fill design, refilling the Melo 2 is quick and mess-free. The iStick TC60W features all standard protections like Short Circuit, Low Voltage, and more.
Eleaf iStick TC60W Features:
Eleaf Melo 2 Atomizer Features:
1 x iStick TC60W mod (High Drain Battery not included)
1 x Melo 2 Atomizer (pre-installed with 0.3 ohm kanthal EC coil / use in VW mode only, 30-80W range)
1 x EC TC-Ni coil (0.15 ohm / use in TC-Ni mode only)
1 x EC TC-Ti coil (0.5 ohm / use in TC-Ti mode only)
1 x Micro USB charge cable
4 x Spare silicon rings
1 x iStick TC60W User Manual
1 x Melo 2 User Manual
1 x Nice display box to keep in when not in use
Read more on how to use the Eleaf iStick TC60W Kit over on our site.
The newest member to the popular istick family, the Eleaf iStick TC60W is a Variable Wattage and Temperature Control mod.
A chief benefit of Temperature Control is the ability to avoid burnt or "dry hits" while vaping - this can result from over-heating the coil, or from heating a coil that is dry, due to a low e-liquid level inside the atomizer. In temperature mode, the mod allows you to adjust between 200-600 degrees Fahrenheit (or 100-315 degrees Celsius), and can support the use of Nickel (Ni200) and Titanium wire. In Variable Wattage mode, the iStick TC60W has a 60 watt maximum output.
In addition, the iStick TC60W does not come with a built-in battery. Instead, it offers the convenience of a user-replaceable battery, so you can quickly swap out a drained battery for a freshly charged one as needed. The iStick TC60W allows for easy on-board charging with the included Micro USB charge cable.
This latest iStick sports a different look, with the atomizer mounted at the center top of the device, rather than at one end along the top. The iStick TC60W retains all the key features the series is beloved for: a small size, an ergonomic design with rounded edges, and user-friendly operation.
The Eleaf iStick TC60W Kit is an excellent, budget-friendly introduction to Temperature Control vaping! Its compact, ergonomic design makes this device very comfortable in the hand. And, with a removable battery, it means you never have to wait for your battery to charge - just swap out a drained battery for a freshly-charged one. The included Melo 2 atomizer is a perfect match for the iStick TC60W. The included coil heads allow vapers to experience Variable Wattage and Temperature Control vaping as easily as changing out a coil head. With its top fill design, refilling the Melo 2 is quick and mess-free. The iStick TC60W features all standard protections like Short Circuit, Low Voltage, and more.
Eleaf iStick TC60W Features:
- 5-Click the Power button to turn unit ON/OFF
- Long-press the Menu button to switch between Variable Wattage and Temperature Control (TC-Ni or TC-Ti) Mode
- Variable Wattage: from 1.0 - 60.0 W in 0.1 watt increments
- Temperature Control: from 200 - 600 degrees Fahrenheit (or 100 - 315 degrees Celsius)
- Minimum/Maximum Atomizer Resistance: In Variable Wattage mode - 0.15 ohm - 3.5 ohm. In Temperature Control mode - 0.05 ohm - 1.0 ohm.
- Stealth Mode: Vape with the OLED screen off. To turn Stealth mode ON/OFF, press the Power button and downside of the Adjustment button simultaneously when the device is shut off.
- Adjustment Button Lock: Lock your wattage setting while in Variable Wattage mode to prevent accidental changes. To Lock/Unlock, press the upside and downside of the Adjustment button - the screen will display "Lock" or "Unlock".
- Atomizer Resistance Lock: Lock in the atomizer resistance in Temperature Control mode. Press the Power button and the upside of the Adjustment button simultaneously for 2 seconds to Lock/Unlock the atomizer "base resistance". When Locked, a symbol of a small lock will display next to the atomizer resistance on the OLED screen. When Unlocked, an ohm sign will display instead. Please note: Make sure the coil is at room temperature before Locking it to ensure the device reads the correct resistance.
- Switch OLED Screen Orientation: Rotate the OLED screen display 180 degrees. Press the upside and downside of the Adjustment button simultaneously when the device is shut off.
- 10-second Safety Cutoff: Pressing the Power button for more than 10 seconds will cause the device to shut off. The OLED screen will display "Over 10s".
- Short Circuit Protection: If an atomizer short occurs, the OLED will display "Atomizer Short".
- No Atomizer Protection: If the attached atomizer is not making a proper connection with the device, the OLED screen will display "No Atomizer". Verify that your atomizer is screwed onto the device properly.
- Low Voltage Protection: If battery voltage falls below 3.3V, the OLED screen will display "Lock". Charge the battery to unlock the device.
- Temperature Protection: In TC-Ni and TC-Ti mode, if the actual temperature of the coil is higher than the set temperature, the OLED screen will display "Temp Protection".
- Temperature Alert: If the device overheats past the alert temperature, the output will shut off automatically and the screen will display "Device Too Hot". Set the iStick aside and allow to cool down completely before continuing use.
Eleaf Melo 2 Atomizer Features:
- Top Side-Fill
- Adjustable Airflow Control
- Changeable Coil Heads with 100% Organic Cotton for pure flavor
- Stainless Steel construction
- Pyrex Glass tank for protection from harsh liquids
- Delrin-insulated Wide Bore Drip Tip
- Capacity is 4.5ml
1 x iStick TC60W mod (High Drain Battery not included)
1 x Melo 2 Atomizer (pre-installed with 0.3 ohm kanthal EC coil / use in VW mode only, 30-80W range)
1 x EC TC-Ni coil (0.15 ohm / use in TC-Ni mode only)
1 x EC TC-Ti coil (0.5 ohm / use in TC-Ti mode only)
1 x Micro USB charge cable
4 x Spare silicon rings
1 x iStick TC60W User Manual
1 x Melo 2 User Manual
1 x Nice display box to keep in when not in use
Read more on how to use the Eleaf iStick TC60W Kit over on our site.
