Help!! Coil Building Problems

[ChiBiHounD]

What are the top 5 combinations of Kanthol A1 gauges I can use to create a Fused Clapton that ohms out around 0.4-0.3 ohms. Note that i'm going to be using Kanthol for both the core and clapton. Also I would like to use a 3mm/2.5mm drill bit to wrap my coils around.

 

[sonicbomb]

24 26 or 28 for the cores, 32 36 or 40 for the wrap. If you are using a regulated device then resistance isn't important. Use steam-engine to model your builds. You can approximate the target resistance by just counting the core wire resistance, or use the more advanced section for more accuracy.

My personal favorite is single or fused 26G with 36G wrap.

 

[Two_Bears]

What are the top 5 combinations of Kanthol A1 gauges I can use to create a Fused Clapton that ohms out around 0.4-0.3 ohms. Note that i'm going to be using Kanthol for both the core and clapton. Also I would like to use a 3mm/2.5mm drill bit to wrap my coils around.

I would say two strands of 28 inside and wrapped with 30 or 32.

 

[ChiBiHounD]

24 26 or 28 for the cores, 32 36 or 40 for the wrap. If you are using a regulated device then resistance isn't important. Use steam-engine to model your builds. You can approximate the target resistance by just counting the core wire resistance, or use the more advanced section for more accuracy.

My personal favorite is single or fused 26G with 36G wrap.

Thanks for the help! I never knew what that Wire Wizard thing was I thought it was just something random but it was actually quite helpful.

I ended up purchasing a 26G Core and 36G Wrap to correlate with my 3mm Diameter and 0.3 Ohms ending up with 7.5/7 Wraps

 

[sonicbomb]

Is the coil for a regulated or unregulated device?

 

[ChiBiHounD]

Is the coil for a regulated or unregulated device?

Regulated why?

 

[KenD]

Regulated why?

With a regulated mod the resistance doesn't matter as much. You can increase the wattage to compensate for beefy coils, meaning that you can avoid long ramp-up times.

Sent from my M7_PLUS using Tapatalk

 

[sonicbomb]

Regulated why?

If you are using a regulated device then resistance isn't important.

 

[classwife]

Moved to Coil Builds from Simple Solutions


Simple Solutions is to assist the Beginning Vaper with getting started

 

[ErrrKT19]

What are the top 5 combinations of Kanthol A1 gauges I can use to create a Fused Clapton that ohms out around 0.4-0.3 ohms. Note that i'm going to be using Kanthol for both the core and clapton. Also I would like to use a 3mm/2.5mm drill bit to wrap my coils around.

2x26g cores, wrap with 34g or smaller