Ordered a Satin Silver/Blue LED V2!

[Drip Drops]

Yep, I'm pretty excited! Pulled the trigger on a Satin Silver V2 with Blue LED!

My Order is:

Satin Silver V2 Blue LED
Multi Charger
2 x AW IMR 18650's
EXT Cap Satin Silver
Noalax Thread Lubricant
Ego Connector


I pretty much just got the basics. Still going to need to get some good tanks, and sleeve/case accessories e.t.c. What are the must haves for the Provari?

 

[rondasherrill]

Get yourself an awesome rebuildable atomizer and drip tip. Then the only must haves are juice. (That's what I did)

On a more serious note... Check out serenitygear.com for some beautiful sleeves or holsters for the Provari. I don't personally like tanks, but some people seem to have a strange obsession with them. The Phyniac tanks I think are the most popular, for the designer look and glass that withstands strong juices.

 

[Infinitejest]

Congrats on your purchase, SInce you got the XL version you might want to take a look into carto/tank vaping. CHeck out the XL phiniac pyrex and some single coil XLcartos. get the phiianc equipment kit bag Heir carto punch is needed, grab a slap yo mama adapter easy to fill and you can replace inner orings. Your going to love your V2, i got the same color/led combo, best looking in my opinion and the stainless wears better than the colors. BY black mini is already showing chips and scratches after a few months.
Also take a look a Serentity Leather gear for a holster, that bad boy will not fit in your pocket. Tell all 3 companies above that Troop recommended you.

 

[Drip Drops]

Thanks for the advice everyone! I will check all of these out. Please keep the suggestions coming

Where can I get one of those carbon fiber sleeves ?

 

[thinkingaboutit]

I love my Pyrex tanks and triple v with the side fill from valley vapes. Standard resistance cartos double punched and I haven't had a single issue.

 

[Infinitejest]

i BELIEVE THOSE ARE MADE PERSONALLY, I'VE LOOKED ALL THE COMMERCIAL SITES AND THEY DON'T CARRY THEM. iF YOU CAN'T FIND AN INDIVIDUAL TO MAKE YOU ONE, THE GUY AT SERENITY LEATHER IS LOCATING A THINNER LEATHER WITH OUT THE DRAGON SKIN. yOU MAY HAVE TO WAIT. btw, IF YOU FIND SOMEONE TO MAKE THE CARBON FIBER SLEEVE, PM BECAUSE I WANT ONE TOO.

Thanks for the advice everyone! I will check all of these out. Please keep the suggestions coming

Where can I get one of those carbon fiber sleeves ?

 

[Infinitejest]

anOTHER suggestion, if you are hard on your gear, camping or hard night out check out Big Daddy's Vapors for their tanks, they are built like tanks.

 

[The Hill Giant]

Get on the notification list for the Penelope over at CoV. You'll thank me later. There's a reason why the best thing anyone ever says about carto/tank setups is "I haven't had any issues yet". If you don't want to drop the coin on a Penelope, the version 2.5 Vivi Novas are solid.

 

[spraintz]

If you want an inexpensive way to jump into a rebuildable I suggest the Phoenix rebuildable atomizer. It's about $15-$20, it's small, pretty dang easy and works awesome. It's a good atomizer to learn on and see if you are ok with rebuilding and then you can jump into some of the better ones later. I got mine a couple of weeks ago and it's great. Got my provari a few days ago and it makes it even better.

MOV Phoenix Rebuildable Atomizer | Mountain Oak Vapors Premium Tennessee E-Liquid

 

[Baditude]

Best looking carto tank for a Provari, IMO, is the Pro V made by Vaporfexion and sold by NHaler. The stainless end caps are tapered and have the provari-isque dimples, choice of polycarbonate tube colors, perfect diameter for a Provari. They are a pre-order item. Looks awesome with a Siam Mods metal drip tip.

View attachment 126647 View attachment 126653

The Bella/Elegance acrylic tanks sold by Hoosier Vapes look like the JonBoy Lavatank. They are the same diameter as a Provari. You can fit a clear Phiniac pyrex tube on them. Here's a pic of my Bella-Phiniac hybrid on my silver bullet.

View attachment 126649

The IBTanked pyrex tanks are also the same diameter as a Provari. The pyrex tubes can be customized pretty much how you want and are pretty inexpensive.

View attachment 126651

Highly recommend the Big Daddy Vapes slap-yo-moma tool. Not only makes juice filling a breeze, but will save your o-rings from unneccessary damage from the sharp edge of your carto during assembly.

The Serenity Gear holsters and protective sleeves are a great suggestion. I have a sleeve for my white silver bullet.

View attachment 126940

 

[Drip Drops]

Thanks everyone! Lots of good stuff here

 

[Infinitejest]

[
Got the Penelope and little to no support from company (missing gear) heard great things about them amd lucky enough their fans ecf members) thanks MWA help out. Their fan loyalty must come from somewhere.

QUOTE=The Hill Giant;6978315]Get on the notification list for the Penelope over at CoV. You'll thank me later. There's a reason why the best thing anyone ever says about carto/tank setups is "I haven't had any issues yet". If you don't want to drop the coin on a Penelope, the version 2.5 Vivi Novas are solid.[/QUOTE]

 

[Drip Drops]

Okay, besides the penelope, what is the absolute best rebuildable atomizer?

 

[Drip Drops]

Just ordered a Sapphire Water Blue Bella Tank, and a Lil Momma SS Tank

Now just need to get a Penelope and all should be good lol!

Got Confirmation yesterday that my Provari had shipped. Can't wait !

 

[Drip Drops]

My mailbox had a Provari and a Lil Mama Tank in it today!!!

Put the 18650's on the charger and they were green in about an hour

And OMG this thing rocks! loaded up the lil mama with a 3.0 boge, and some Bounty Hunter. This thing vapes like a champ. The display tool me about a minute to figure out, and it works great.

Way better than the Twists I was using. The Provari is definetely the King. I don't see how it could get any better than this.

 

[Drip Drops]

When is a good time to charge the 18650 batteries?

Should I wait until the light blinks and they die? or is there a certain number under the cb category that I should be recharging them at?

 

[spraintz]

that's a good question...

In my experience thus far I have yet to run a 18650 down far enough to even get the ProVari to start flashing and warning me. That's with a full day of use and lots of chain-vaping.......and I used to think I was a heavy vaper.

I just throw the fresh one on in the morning, and throw the next one on when I get home from work and I know it will be good all night if I go out. Once I get green on the charger I pull the battery and let rest.

 

[thinkingaboutit]

I like to charge when it starts flashing. No need to run them dead.