Stressed battery?

[Darrgoe]

I am currently vaping on a Freemax Marvos S using a Brunhilde MTL tank with a .93 ohm coil and the battery is an AWT 3.7 volt High drain 18650. The Marvos S has 3 power options, Power, Smart and bypass. My question is in bypass mode the mod is reading 4.0 volts at 15 watts is this stressing the battery?

 

[Rossum]

I'm not familiar with that specific battery, but let's say you're running that 0.93 ohm coil at a full 4.2V. It would only drawing 4.52 amps. There's no way that should be stressing any battery claiming to be "high drain".

 

[somdcomputerguy]

I'm not familiar with that mod or that battery, so I can't really answer your question. FWIW, if it vapes ok and checking that the battery isn't overheating yields a green check mark, you might be ok. Have you checked out Mooch's blog? Blog entries by Mooch Or his Recommended Batteries list? Mooch's Recommended Batteries

 

[Izan]

I am currently vaping on a Freemax Marvos S using a Brunhilde MTL tank with a .93 ohm coil and the battery is an AWT 3.7 volt High drain 18650. The Marvos S has 3 power options, Power, Smart and bypass. My question is in bypass mode the mod is reading 4.0 volts at 15 watts is this stressing the battery?

Hi,

No.
The average 18650 will handle 4 Amps effortlessly.

Cheers
I

 

[Darrgoe]

Hi,

No.
The average 18650 will handle 4 Amps effortlessly.

Cheers
I

Thanks