Just perfected a coil I call the horseshoe! Using 28ga on a 1.3mm jig. 20 wraps, tighten on the jig as tight as you can get it. I take it off and insert a piece of extra 28ga wire through the coil. I then wrap the extra wire around the 1.3mm jig to get the coil into the shape of a horseshoe. I snug it up as tight as I can get it and pull the extra wire tight and clamp it off with a pair of hemostats so it maintains the horseshoe shape. I then lightly torch the coil so it maintains it's shape, unclip the hemostats and pull out the extra wire. You have a perfect horseshoe. Mine came out to 1.6ohms. Attach to the Triton and put a cloud of cotton behind it and between the coil and the posts. I then use a needle to poke a hole through the middle of the cotton and juice her up. Point the atty hole straight through the hole on the middle of the horseshoe and hit the fire button! Sik as ....!!!!! As soon as I get a video up will post it. vape On!
sounds interesting.
