. I'm back
Now.. to answer a few questions.. If you are going to drip using auto batts.. be prepared to:
suck out a lot of batteries.. have a place to drip dry batts.. and kill a lot of batts
I know. I do it
If you want to avoid some of this headache.. you can stick with the Ego (type) auto battery. They are made a little differently, and somehow the battery is sealed to prevent some of the damage from juice. you will still be sucking out juice, but you wont kill as many batts.
Also, you are better sticking with one or two 'battery' sizes. With the use of adapters.. why use weenie battys? The bigger battys will last longer, PLUS you have a tiny bit more protection by using the adapter (an extra 'piece' between your precious batty and the killer juice!)
One of my favorite combinations is the 901 atty with an 801 batty. I have killed many a batty this way! I have a little candle jar with a napkin inside to 'drip dry' my batts.. and they go in and out of rotation.
With the use of only the bigger batty sizes.. you will need fewer adapters as well. ( that's batty>atty) This adapter will allow you to use the 801 batty on both the 901 atty and the 808 stuff. If you also use the Ego/Riva/VGO battys.. then you will need 510> ?
So ... say your favorite attys are the 901 and 401. You could easily get by with the previous adapter plus:
That would be only 3 adapters you need to find. The 510 adapters will work with your Ego/etc battys AND your 510 battys (if you need them in a pinch) and the 801 will work with the 401 and 901. You don't need the 801>510 because it will already fit the 510 type batty (EGO) you have. You don't need to get separate 901 and 808 because it's the same thing.. etc etc.
(I HOPE THIS IS ALL MAKING SENSE! )
So.. to sum it up..
I'm not sure what stock you have on hand.. but I'm trying to save you from buying extra uneccessary equipment.... so depending on what attys you may have ATM.. those might be the apapter(s) I would buy now. Plus a couple additional auto batts, if you don't have them.*
I hope this helps! Any questions.. just PM
You need to be logged in to comment