Blogs

Latest comments

Blogs statistics

Categories
8
Blogs
14,728
Blog entries
6,587
Views
9,213,256
Comments
6,116
Ratings
2
Flashy Lights ...OOOOOoooo VapingUnicorns Thought on the x217... Not your Usual Review ! So.. My X217 ...what do I think..shoot what dont I think is the questions ! If I really want to pack a punch and run at high wattage (over 100) this is MY go to device! I love this device because the fact...
VapingUnicorn
Views
6K
Reaction score
1
Comments
2
ECF Blogs
VapingUnicorns thoughts.. This is not your usual review.. Hmm.. where do I even start with telling how I feel about my Smok Nord...let's start with.. I dont normally like Smok.. then again i cant say too much as i stopped using them after i got sick of wasting my money on buying new mods after...
Vaping Terminology Tutorial: Re-wrapping a Battery Understanding Battery Capability/Capacity Why does my Tank Leak and what can I do about it? Why does my atomizer crackle&pop and spit hot juice on my tongue? Understanding the relationship between power and coil resistance Why do we...
stols001
Views
218
Reaction score
5
Comments
4
ECF Blogs
Shiny days ahead. I used to mod at crazymeds and crazyboards. LOL. Had to move on to new things. I am HOPING that crazyboards took a core dump like crazy meds just way too much of my past on there. Abilify made me see dead people the one night I tried it. My (free but not smart) pdoc made me...
Hello Mr. Mooch. I am French (I use Google translation). I have a question for you and I would be very happy if you can answer me. I have to go hiking, I should recharge my battery quickly in cottages (4 amp xtar slim4) Can I use 18650 vtc6s that have a fast charge of 5 amps where is it safer to...
Rriflemann
Views
280
Reaction score
1
ECF Blogs
In 2009, I tried my first electronic cigarette, a early cig-a-like, demonstrated at a mall kiosk, That introduced me to the technology, discovering that was a major turning point, although it took a few years for the technology to catch up to my nicotine need, the conversion occurred when the...
Opinionated
Views
9K
Reaction score
3
Comments
2
ECF Blogs
This is the OP of an older and now dead thread I did a year or so ago.. thought I would add it to my blog, for easy reference: There are many abbreviations of terms that a newer vaper may or may not understand when reading the posts of long-time vapers. A more modern, quick view, listing of...
nope. loathe the clamp system. can't stop it gurgling. flavour is meh. i realise it's probably a problem with me and not the atty as most seem to rave about it but for the moment it sits in the category of nope. the provari mini there will get a post of its own as it does merit it. update -...
lupinehorror
Views
59
Reaction score
1
ECF Blogs
yup. by far the best charger I've ever used. 4 bays at 3A simultaneously
sonicbomb
Views
5K
Reaction score
1
ECF Blogs
The process for picking a coil and battery for a mech is pretty straight forward. 1. Choose a (realistic) power level 2. Use ohms law and/or steam-engine to choose a coil/s that provides this wattage 3. Calculate what amp draw this will generate. 4. Pick a battery that of a known and proven CDR...
You can measure the voltage drop (inefficiency) of an unregulated device by putting a resistance/volt meter across the positive and negative posts of a atomizer, loaded with a coil as it needs to be measured under load. Measure the voltage and subtract it from the voltage that was in the...
lupinehorror
Views
76
Reaction score
1
ECF Blogs
yup. battery cap threads could be smoother but apart from that nothing to grumble about.
Got my first mod today, an Eleaf Pico 75w w/Melo 3 tank. Used VW at first with 0.3 ohm coil that came with it and found that 35 watts gave a good hit MTL AF at/near minimum. Very nice. Not a fan of DL in VW with this setup. Just put in a TC coil and found 460F with 75 watt ramp gives a great...
Hello, and thanks for reading the blog. Broke my Crown IV Checkmate Tank glass last night, dropped the mod onto a metal bar. Atomizer is fine, but broke a small piece out of the bubble glass. Mine came installed with the bubble glass. Apparently they don't lube up the o-ring when they install...
I'm a sucker for a good looking mod, and seeing the above discounted by 50% was hard to resist. First impressions were overall positive, an attractive zinc alloy and resin mod with a thoroughbred DNA chipset that was well balanced in the hand using either a single 18650 or 22700 cell. The fire...
Hey folks ! Well, I've decided to give more energy to ECF FORUM. Today I renewed my lapsed membership to ECF, am now a supporting member. Feels good. Seems like the forum isn't used as much as it was in the past, or maybe it's just me not looking in the right places....... Anyway, thanks...
qorax
Views
5K
Reaction score
2
ECF Blogs
Continued from Part-1... 3(c) - Then just tuck both ends into the deck well. Step-4: Test your build. 4(a) - Saturate the wicks. 4(b) - Check resistance once again (notice it remains the same). 4(c) - Vapor Test. Step-5: Assemble the system. 5(a) - Fill the Tank. 5(b) - Attach the...
qorax
Views
6K
Reaction score
2
Comments
10
ECF Blogs
The New Kayfun Lite (2019) is worth every penny. What with it's size, simplicity, ease of setup and refilling. Then the wonderful vape of an expected KFL that we get out of it. I have reviewed it >here<. And also shown a simple-single coil build >here<. Now it's time for another easy, but...
On this, the eve of my 55th birthday, I have some good news: I've given up nicotine. After five years vaping, I've switched to zero nic juice. I still use the Serpent tank and a K120 from Kanger, but a couple weeks ago I decided it was time and ordered a bottle of my ADV in zero nic. This was my...
I am Stone, the first time I came to this forum to write a blog, a little nervous, then, start from self-introduction. I am in my forties, I like sports, I like fresh things, and of course I am very interested in e-cigarettes. The biggest wish is to know more like-minded friends through this...