ECF Blogs

This is an example user blogs system category.
sonicbomb
Views
5K
Reaction score
1
ECF Blogs
The process for picking a coil and battery for a mech is pretty straight forward. 1. Choose a (realistic) power level 2. Use ohms law and/or steam-engine to choose a coil/s that provides this wattage 3. Calculate what amp draw this will generate. 4. Pick a battery that of a known and proven CDR...
You can measure the voltage drop (inefficiency) of an unregulated device by putting a resistance/volt meter across the positive and negative posts of a atomizer, loaded with a coil as it needs to be measured under load. Measure the voltage and subtract it from the voltage that was in the...
lupinehorror
Views
54
Reaction score
1
ECF Blogs
yup. battery cap threads could be smoother but apart from that nothing to grumble about.
Got my first mod today, an Eleaf Pico 75w w/Melo 3 tank. Used VW at first with 0.3 ohm coil that came with it and found that 35 watts gave a good hit MTL AF at/near minimum. Very nice. Not a fan of DL in VW with this setup. Just put in a TC coil and found 460F with 75 watt ramp gives a great...
Hello, and thanks for reading the blog. Broke my Crown IV Checkmate Tank glass last night, dropped the mod onto a metal bar. Atomizer is fine, but broke a small piece out of the bubble glass. Mine came installed with the bubble glass. Apparently they don't lube up the o-ring when they install...
I'm a sucker for a good looking mod, and seeing the above discounted by 50% was hard to resist. First impressions were overall positive, an attractive zinc alloy and resin mod with a thoroughbred DNA chipset that was well balanced in the hand using either a single 18650 or 22700 cell. The fire...
Hey folks ! Well, I've decided to give more energy to ECF FORUM. Today I renewed my lapsed membership to ECF, am now a supporting member. Feels good. Seems like the forum isn't used as much as it was in the past, or maybe it's just me not looking in the right places....... Anyway, thanks...
qorax
Views
5K
Reaction score
2
ECF Blogs
Continued from Part-1... 3(c) - Then just tuck both ends into the deck well. Step-4: Test your build. 4(a) - Saturate the wicks. 4(b) - Check resistance once again (notice it remains the same). 4(c) - Vapor Test. Step-5: Assemble the system. 5(a) - Fill the Tank. 5(b) - Attach the...
qorax
Views
6K
Reaction score
2
Comments
10
ECF Blogs
The New Kayfun Lite (2019) is worth every penny. What with it's size, simplicity, ease of setup and refilling. Then the wonderful vape of an expected KFL that we get out of it. I have reviewed it >here<. And also shown a simple-single coil build >here<. Now it's time for another easy, but...
On this, the eve of my 55th birthday, I have some good news: I've given up nicotine. After five years vaping, I've switched to zero nic juice. I still use the Serpent tank and a K120 from Kanger, but a couple weeks ago I decided it was time and ordered a bottle of my ADV in zero nic. This was my...
I am Stone, the first time I came to this forum to write a blog, a little nervous, then, start from self-introduction. I am in my forties, I like sports, I like fresh things, and of course I am very interested in e-cigarettes. The biggest wish is to know more like-minded friends through this...
Old Greybeard
Views
7K
Reaction score
2
Comments
12
ECF Blogs
Just a quick article on the benefits of flat wire for DIY coils. I’m not a huge fan on Claptons, I’ve never managed to get the right combination of size, material and temperature and generally found the resulting vape is too hot, the ramp times too high and if you use heavy gauge wire, they are...
Requirements: Some bottles ... 80/20 VG/PG mix, some flavours ... A dripper and a 5ml bottle. Come and join us on The 5ml bottle squeeze, shake and vape challenge
Only 3 very minor criticisms: The 510 was a bit "graunchy" with my Kylin. It's OK with the Dpro so hopefully it's cured itself The silicon at the top edge is not glued down, if it got caught on a zip etc. it might split The display is ever so slightly squint What I love: Well balanced in...
This comes courtesy of Usonicig I really wanted to be impressed by this....unfortunately, we're not there yet...for all of the design thoughts put into it, it's on point; Small, lightweight, button activated, refillable pod, comfortable mouthpiece, not too tight of a draw but not airy enough...
Hey vapers ! I've continued blogging on my own site. You can see a few of my reviews on this ECF Forum here. Click these colored letters here: The Vapor Ninja - Vaping Like A Ninja , (DISCLAIMER: My site uses affiliate links.) for my news, reviews, and blog entries on my own site ! A huge...
lupinehorror
Views
74
Reaction score
2
Comments
2
ECF Blogs
i meant to start this over a year ago but as far as i remember i looked for the option to begin, couldn't find it, and promptly gave up. textbook. it will become a yup or a nope for new arrivals with little detail. that'll no doubt anger the people who will never read any of it.
Old Greybeard
Views
5K
Reaction score
2
ECF Blogs
Vaping is a strange business. Due to the subjective nature of the human psyche, what to the man or woman standing next to you might be greatest thing since sliced bread, could quite possibly leave you distinctly unimpressed. While there are lots of reviewers out there, there is also an awful lot...
Boys in Drag Cream Rant Ingredient ml Grams % Nicotine juice 36 mg (100% PG) 2.50 2.59 16.67 VG dilutant 10.55 13.31 70.30 Total base 13.05 15.9 86.97 Bavarian Cream (TPA) 0.45 0.45 3.00 Blackcurrant (CAP) 0.17 0.17 1.11 Boysenberry (Flavorah) 1.00 1.00 6.67 Dragonfruit (TPA) 0.33 0.33...
Coil Master DIY Kit v3 Kanthal A1 24ga 10 wraps on a 25 jig 0.61Ω Digiflavor Siren 25 GTA (single coil MTL RTA) Vaping @ 20W Coil: 0.61Ω Volt: 3.48 Amp: 5.21