This is how to enter variables into the Breaktru e-juice me up calculator software. In the attached picture, the red letters indicate the following:
A: This is your nicotine base’s percentage of PG to VG. The two (to the left and right) will equal 100%. If your base is 100% PG, enter “100” in the PG box. If 100% VG, enter “100” in the VG box. If 50/50, enter “50” in the PG box and “50” will automatically appear in the VG box.
B. This box is for the strength of your nicotine base. In the example, I am using 48 mg nicotine in a 100% PG base.
C. Enter the strength you want your final mix to be. In the example, I am going to achieve a 12 mg nicotine e-liquid.
D. Enter the amount of e-liquid you want to make. This recipe is for a 30 ml bottle of juice.
E. In my finished e-liquid, I sometimes thin the mixture with distilled water or vodka. In this example, 5% of the e-liquid will be distilled water (and the calculator will compensate… so technically, my 50/50 result will actually be 47.5 PG / 47.5 VG and 5% water).
F. Enter the percentage of each flavor in these boxes, with their names in the boxes to the left. The total of all the flavors will be the percentage of flavor in your final mix. In this example, I am using 9 + 4 + 3 + 2.5 + 1.5 = 20 percent total flavor.
G. Most flavors are in a PG base. Enter 100 in all the PG boxes, unless you know for sure that it is some other base. If you know for certain that the flavoring contains neither PG nor VG, check the box.
H. This is just a guide. Different droppers will all have a different number of drops per ml. When actually mixing, it is more important to look at the actual ml amounts that you’re mixing than the number of drops.
I. This is the percentage of PG to VG that you want to achieve in your final mix. In this example, I want a 50/50 e-liquid. Entering a number in one box will automatically fill in the other to achieve a 100% total.
When you are through entering the variables, click on the “calculate” button and it will tell you exactly how much of each ingredient to mix together to achieve your desired juice.
My final juice with this recipe starts with a 100% PG base of 48 mg nicotine and results in 30 ml of 50PG/50VG (or actually 47.5/47.5/5 as noted above), 12 mg juice that is 20% flavor.
Hope this little tutorial gets you started!
