Iatty - Great Tip!

lorderos33;3681289 said:

Here's another bit of general knowledge that may help some of GG family members regarding wire gauge and resistance.

Thinner wire = more resistance. For example. If you use a 36ga resistance wire, to get to 1.2 - 1.6 ohms on an iAtty, you will only get 1 - 2 wraps. With 34 ga you will get 3-4 wraps and with 32 you will get 4-5. That said, they all have their uses.

High voltage vapers will find it easier to use 36ga because you can very easily get to 3 or 4 ohms without needing to really load up the number of coils needed.

The LR folks will like 34 and 32ga better because you can get those low ohm coils and still have a reasonable amount of play room to make the coil easy to make.

The 3.0v set will benefit greatly from the 32ga because you can get to really low resistances and still be able to make an easy coil because you can have more length to work with.

Happy vaping

Click to expand...