Vamo V2 VV/VW - Stainless (Got mine from DiscountVapers.com)
the Vamo has one of the highest power outputs available. Stainless is a very resilient finish compared to the chrome/gunmetal.
Smoktech Natural Mechanical (LiteCigUSA.net has them in stock fairly priced)
a rather inexpensive mechanical mod that uses the same batteries as the Vamo. Not a bad looking device either.
AGA-T+/T2 Genesis Atomizer (Got mine from DiscountVapers.com)
a very versatile genesis atomizer, looks absolutely amazing on the Vamo. Get the "Horn" drip tip from DV for a neat looking topper.
IGO-L Dripping Atomizer (Again, DiscountVapers.com)
a powerful little monster, easy to set up, inexpensive, goes good with the same Horn tip or anything else you can find for it.
6"x12" #500 SS Mesh (SteamMonkey.com has the best prices I've found)
To make wicks for your genesis atty.
Braided Silica Wick (RTDVapor.com has the best quality wick of any US supplier)
To make wicks for your dripping atty.
Panasonic Hybrid/IMR CGR18650CH (RTDVapor.com)
Probably one of the better 18650 batteries available (Long Mode on both Vamo and Natural) Slightly higher capacity of any 18650 high drain.
Efest (800mah) or AW (700mah) IMR 18350 Flat Top (RTDVapor.com)
Both will get the job done in shorty mode on both devices (Most people swear by AW on this forum)
Nitecore i2 charger (RTDVapor.com)
A no-fuss protected smart battery charger. Won't overcharge your batteries, can handle mixing batteries. Will handle short and long at the same time without needing spacers.
Kanthal A-1 30awg Resistance Wire (TemcoIndustrialPower.com)
For making coils to use with a Vamo (VV/VW)
Kanthal A-1 28awg Resistance Wire (TemcoIndustrialPower.com)
For making coils to use with a Natural (Mechanical)
Hope this helps. All in all you can set this whole thing up for less than the cost of a ProVari.
the Vamo has one of the highest power outputs available. Stainless is a very resilient finish compared to the chrome/gunmetal.
Smoktech Natural Mechanical (LiteCigUSA.net has them in stock fairly priced)
a rather inexpensive mechanical mod that uses the same batteries as the Vamo. Not a bad looking device either.
AGA-T+/T2 Genesis Atomizer (Got mine from DiscountVapers.com)
a very versatile genesis atomizer, looks absolutely amazing on the Vamo. Get the "Horn" drip tip from DV for a neat looking topper.
IGO-L Dripping Atomizer (Again, DiscountVapers.com)
a powerful little monster, easy to set up, inexpensive, goes good with the same Horn tip or anything else you can find for it.
6"x12" #500 SS Mesh (SteamMonkey.com has the best prices I've found)
To make wicks for your genesis atty.
Braided Silica Wick (RTDVapor.com has the best quality wick of any US supplier)
To make wicks for your dripping atty.
Panasonic Hybrid/IMR CGR18650CH (RTDVapor.com)
Probably one of the better 18650 batteries available (Long Mode on both Vamo and Natural) Slightly higher capacity of any 18650 high drain.
Efest (800mah) or AW (700mah) IMR 18350 Flat Top (RTDVapor.com)
Both will get the job done in shorty mode on both devices (Most people swear by AW on this forum)
Nitecore i2 charger (RTDVapor.com)
A no-fuss protected smart battery charger. Won't overcharge your batteries, can handle mixing batteries. Will handle short and long at the same time without needing spacers.
Kanthal A-1 30awg Resistance Wire (TemcoIndustrialPower.com)
For making coils to use with a Vamo (VV/VW)
Kanthal A-1 28awg Resistance Wire (TemcoIndustrialPower.com)
For making coils to use with a Natural (Mechanical)
Hope this helps. All in all you can set this whole thing up for less than the cost of a ProVari.
