Sigelei Mechnical Mods

Oktyabr;9610315 said:

Bobee;9608940 said:

The only real problem I'm having which I thought I'd fixed is a hot button issue.... I sanded down everything in the button -.-;; .4 ohms with an Efest 18650 and my button is getting fairly hot. I'm baffled! Threw the same tank on my buddies smok telescope and no issues. I've tried to get some help with this but it keeps getting lost in the thread with no responses... PLEASE! Suggestions or help! Thanks either way.

Click to expand...

Sanded it down, then what? If you didn't get the pin sanded flat it will make a difference how much of it is contacting the center post. I have never had a hot button issue with this model but I notice sometimes if it seems weak on a button press it helps to just spin the button a quarter turn or so, spinning the firing pin as well. This is due to my inability to sand the end of that pin evenly... not Sigelei's problem

I also use a shortened brass screw inside the spring that connects to the bottom of the battery and my top pin is still "stock". Lastly I stuffed the switch itself with conductive grease (in the spring area) which also seems to help. I get zero drop to two decimal places straight off the 510 connector and only .2 drop with a 1.5 ohm mini DID genesis on top.

Click to expand...