Rewicking Kanger coils

[thatrandy]

So a juice im using is gunking up coils quick. I hate dry burning (it leaves a bad taste no matter how careful I am) and I've read you can re wick it with 1mm wick.

I heard ekowool is good, will that work? if so, what kind do I get hollow,cotton core or silica core?
And would I have to boil/clean the wick before I use it?

thx

 

[Ou2mame]

I've used ekowool with cotton and didn't boil it. Also used Japanese cotton

 

[ENAUD]

I use Peaches & Cream organic cotton yarn. I boil about 12 feet at a time in distilled water, and dry it. I cut off a three inch length and wrap one end very tightly with Teflon tape for easier feeding through the coil, then just snip off to length. My coils gunk up after about one tank, so I just carefully remove the wick, rinse and dry burn the naked coil at each fill. I toss about one coil a month into my re-build jar using this method. Good luck, a little practice and they can be cleaned, filled, and ready to vape in about 3 minutes per tank. KGD or other Japanese cotton works just as well.

 

[Ou2mame]

Only one tank? I get about 3 tanks with Japanese cotton and a week with cellucotton