Aspire CE5-S Bottom Vertical Coil (BVC) Clearomizer, 1.8 ml
Aspire's CE5-S clearomizers use the Aspire Bottom Vertical Coil (BVC) technology - BVC coils have improved longevity, and ensure great flavor and lots of vapor from your e-liquid. The Aspire CE5-S BVC clearomizer is made of stainless steel. It features a removable drip tip and a PCTG plastic tank tube - PCTG offers greater clarity than polycarbonate plastic. There are two windows on each side of the clearomizer, allowing you to see how much e-juice remains inside. It has 1.8 ml e-juice capacity and is easy to fill or replace the coil!
To change the coil of the Aspire CE5-S, simply unscrew the base/bottom of the clearomizer (make sure it's empty first), unscrew the old coil and screw in a new one. To fill with e-liquid, take the clearomizer tube and tilt a slight angle. Fill with 1.8 ml of e-liquid (be careful not to drip any e-juice down the center tube, that is for airflow.) Finally, screw the base back on and set aside for a few moments to allow the coil to become fully saturated. Please note that the Aspire CE5-S, like the Aspire K1, is only compatible with these Aspire BVC coils, and NOT with the Aspire NAUTILUS BVC coils.
The Aspire CE5-S is 510/eGo threaded and will work great with eGo batteries - it is a great match with our Twist Variable Voltage 1300mAh eGo battery. Customize your vape by switching out the included removable 510 drip tip with a different 510 drip tip.
To use the CE5-S clearomizer with 510 threaded devices, you will need an eGo-510 connector.
The Aspire CE5-S comes pre-installed with a 1.8 ohm coil - recommended voltage range is 3.7-4.5V. We recommend starting out at a lower setting, and adjusting up or down by taste.
Available in several colors. Rainbow finish is available here.
Dimensions: Height 82mm (3.2") (with drip tip installed) / Diameter 14mm (0.55")
Aspire's CE5-S clearomizers use the Aspire Bottom Vertical Coil (BVC) technology - BVC coils have improved longevity, and ensure great flavor and lots of vapor from your e-liquid. The Aspire CE5-S BVC clearomizer is made of stainless steel. It features a removable drip tip and a PCTG plastic tank tube - PCTG offers greater clarity than polycarbonate plastic. There are two windows on each side of the clearomizer, allowing you to see how much e-juice remains inside. It has 1.8 ml e-juice capacity and is easy to fill or replace the coil!
To change the coil of the Aspire CE5-S, simply unscrew the base/bottom of the clearomizer (make sure it's empty first), unscrew the old coil and screw in a new one. To fill with e-liquid, take the clearomizer tube and tilt a slight angle. Fill with 1.8 ml of e-liquid (be careful not to drip any e-juice down the center tube, that is for airflow.) Finally, screw the base back on and set aside for a few moments to allow the coil to become fully saturated. Please note that the Aspire CE5-S, like the Aspire K1, is only compatible with these Aspire BVC coils, and NOT with the Aspire NAUTILUS BVC coils.
The Aspire CE5-S is 510/eGo threaded and will work great with eGo batteries - it is a great match with our Twist Variable Voltage 1300mAh eGo battery. Customize your vape by switching out the included removable 510 drip tip with a different 510 drip tip.
To use the CE5-S clearomizer with 510 threaded devices, you will need an eGo-510 connector.
The Aspire CE5-S comes pre-installed with a 1.8 ohm coil - recommended voltage range is 3.7-4.5V. We recommend starting out at a lower setting, and adjusting up or down by taste.
Available in several colors. Rainbow finish is available here.
Dimensions: Height 82mm (3.2") (with drip tip installed) / Diameter 14mm (0.55")
