Best eLeaf iStick Pick Battery

[William Jackson]

I just bought a Pico and I use a cleito Aspire tank. I normally run 50-60w and I will usually have a .125, .2, or possibly .4 coil in it. What would be the best battery for me to purchase? I'm relatively new to all of this. Thanks in advance.

 

[William Jackson]

I just bought a Pico and I use a Cleito Aspire tank. I normally run 50-60w and I will usually have a .125, .2, or possibly .4 coil in it. What would be the best battery for me to purchase? I'm relatively new to all of this. Thanks in advance.

 

[RainSong]

I use Samsung 25Rs now and waiting for LG HG2s in the mail. I have to change my battery out usually 2 times, midday and late evening, vaping around 35-40w and .4-.5ohms.

 

[sonicbomb]

With a regulated mod the coil resistance is essentially irrelevant, the wattage you set is the important value.
For under 60 watts a quality 20 amp battery like the Samsung 30Q, 25R or the LG HG2 are good choices.

Have a read of this if to see how I calculated this value.
Ohms Law - Calculating safe amp usage | E-Cigarette Forum

 

[sofarsogood]

I just bought a Pico and I use a Cleito Aspire tank. I normally run 50-60w and I will usually have a .125, .2, or possibly .4 coil in it. What would be the best battery for me to purchase? I'm relatively new to all of this. Thanks in advance.

eLeaf recommends a minimum amp rating. I believe it's 25 amps. May be best to use a name brand battery from a reliable source with that rating.

 

[Two_Bears]

eLeaf recommends a minimum amp rating. I believe it's 25 amps. May be best to use a name brand battery from a reliable source with that rating.

I use a Pico with LG HG2 battery. I would not recommend lower than .25 resistance because it is only a 20 amp battery.

I use a Kayfun on my Pico so my wattage us down around 8-10 watts. But its a fantastic battery if you are willing to use a bit higher resistance.

 

[Topwater Elvis]

If your normal use will be above 60ish watts, Sony vtc5A.
60ish watts or below, Samsung 30q, lghg2, vtc6, AW 3000mah.

Resistance is irrelevant when calculating battery amp demand when using a regulated power device.

 

[KenD]

I use a Pico with LG HG2 battery. I would not recommend lower than .25 resistance because it is only a 20 amp battery.

I use a Kayfun on my Pico so my wattage us down around 8-10 watts. But its a fantastic battery if you are willing to use a bit higher resistance.

It's a regulated mod so resistance doesn't factor into the amp draw, watts do. A 20-amp battery is good up to about 60w in the Pico, no matter the resistance.

Sent from my K6000 Pro using Tapatalk

 

[KenD]

I just bought a Pico and I use a Cleito Aspire tank. I normally run 50-60w and I will usually have a .125, .2, or possibly .4 coil in it. What would be the best battery for me to purchase? I'm relatively new to all of this. Thanks in advance.

You shouldn't be posting the same thing in so many subforums. Stick to one thread. You'll get a better discussion and more advice.

Sent from my K6000 Pro using Tapatalk

 

[William Jackson]

You shouldn't be posting the same thing in so many subforums. Stick to one thread. You'll get a better discussion and more advice.

Sent from my K6000 Pro using Tapatalk

It was by accident honestly. I couldn't find out how to delete one. Thanks for the advice

 

[Topwater Elvis]

---> Best eLeaf iStick Pick Battery

 

[classwife]

Merged Duplicate threads