eGo Aio replacement coils - 3 out of 5 coils would not thread.

Discussion in 'Tanks, clearomizers and drop-in coils' started by usdoll, Jan 8, 2017.

Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. usdoll

    usdoll Full Member

    Dec 29, 2016
    Is that quite common? I am new at vaping.

    Another question is when you start tasting burnt hits does that mean the coil is blown? Is it bad for you or dangerous when you feel that burn on the back of your throat? It feels kind of bad.
     
    JUDGMENT AFFIRMED and r77r7r like this.
  2. r77r7r

    r77r7r Vaping Master ECF Veteran

    Feb 15, 2011
    Pa,LandOfTaxes
    Burnt hits are often from not priming well, or over-powered, or tank ran dry.
     
    JUDGMENT AFFIRMED likes this.
  3. usdoll

    usdoll Full Member

    Dec 29, 2016
    I woke up in the morning and took a hit and it tasted burnt so right then I added juice. Can a coil ever come back from that?

    I bought 5 coils but 2 of them wouldn't thread well so I've put them aside to take back. I was wondering if others found coils for the eGo Aio sometimes did not thread properly.
     
    JUDGMENT AFFIRMED likes this.
  4. r77r7r

    r77r7r Vaping Master ECF Veteran

    Feb 15, 2011
    Pa,LandOfTaxes
    Usually once a coil is burnt that's it for it. Haven't heard of an issue with the threads. Maybe return it. Sorry you're having a tough time, it gets better! Hang in there :)
     
    JUDGMENT AFFIRMED likes this.
  5. JUDGMENT AFFIRMED

    JUDGMENT AFFIRMED Ultra Member ECF Veteran

    Jul 24, 2012
    BELLE VERNON PA.
    Hi usdoll and r77,
    I never used these coils, but found this on reddit.

    I also burned through my first pack of coils on this device very quickly, but when I got my second pack I changed my vaping style and now I get weeks out of the coils. Here is what you need to do to get the coils to last longer:

    1. Prime it with a few drops
    2. Let it sit in the juice for 10 minutes
    3. Never take a hit for longer than 3 seconds max
    4. Only take one hit every 45 seconds minimum to 1.5minutes
    5. Use a high PG juice (70% PG 30% VG) PG juice is more viscous, so it will soak that coil more quickly.
    6. Never direct lung hit it, ever...
    These problems occur because the coils re-saturate extremely slowly. If you look at the bottom of the coil you will see two tiny holes for the juice to enter, and this is problem, the juice can't enter the coil fast enough to re-saturate the cotton quickly enough, and so if you don't give it enough time, the cotton will be dry and you'll be burning it up.. If you look at other companies coils they all seem to have big openings on the side where the juice can easily flow in, not these joyetech ones.

    If you're a heavy smoker trying to quit, and need those frequent hits, then I would not recommend this device. If you're a light smoker, use a higher nicotine juice so you're satisfied with fewer hits.
     
    r77r7r likes this.
  6. JUDGMENT AFFIRMED

    JUDGMENT AFFIRMED Ultra Member ECF Veteran

    Jul 24, 2012
    BELLE VERNON PA.
    3 out of 5 coils would not thread.
    I don't believe that's common, but it does happen and I've experienced it myself once. Good luck to you.
     
    r77r7r likes this.
  7. JUDGMENT AFFIRMED

    JUDGMENT AFFIRMED Ultra Member ECF Veteran

    Jul 24, 2012
    BELLE VERNON PA.
    The coil (the resistance wire) is still good. If the wick is cotton and i assume it is, then you could replace the wick with new cotton or whatever. But, sometimes that's easier said than done. :( I still mostly use and prefer the old style silica wicks that can be easily cleaned and last for months. Good luck.
     
  8. BrotherBob

    BrotherBob Vaping Master ECF Veteran

    Dec 24, 2014
    Sunnyvale,CA,USA
    Welcome and glad you joined.
    Might like to read:
    Learn About Vaping Here - Everything Ecigs - From Beginner To Advanced
    http://www.ecigarettedirect.co.uk/a...tte-college-guides-tutorials-information.html
    One Stop Reference Shop For New and Experienced Vapers
    Beginner – Guide To Vaping
    May 2016 / Smoking Vapor
    (10) Advancing Up the Vaping Ladder with Egos and Mods | E-Cigarette Forum
    (1) Proper Terminology - Is it a carto, a tank, or what? A Guide to Juice Attachments. | E-Cigarette Forum
     
  9. tac_driver

    tac_driver Full Member

    Jan 14, 2017
    United States
    Looks like it takes the same coil as the JoyTech Cubis
    https://www.heavengifts.com/product/Joyetech-Cubis-BF-Replacement-Coil-5pcs.html
    and they recommend soaking the coil before installing
    Resistance:
    1. BF SS316-0.5ohm (15-30W)
    2. BF SS316-1.0ohm (10-25W)
    3. BF Clapton-1.5ohm (8-20W)
    4. BF SS316-0.6ohm (15 -28W)

    suggest starting at the minimum watts and working up to a comfortable level
     
  10. ValevGK

    ValevGK Full Member

    Jan 13, 2017
    Remember this form:
    Current Volt x Current Volt / current resistance in ohm = Watage power :)

    Send via my Honor 4c using Tapatalk
     

Share This Page