Joyetech Evic VV/VT mods and tweaks KW style

[Kwtony]

I was blessed to get this kit before it came out, from the nice folks at Heaven Gifts and got to use it extensively before most others did. I rebuilt the coils and modified them but only had two when I first got the kit.

Heaven on my lips here

The ego mega is pretty good out of the box, it has a massive amount of air flow, I think I could stick a Burger King Straw down this hole.

I drilled out the stock coil day one which made a big difference.

Anyhow,im not one for leaving anything as it is and always like to tweak it, so I bought some CLR coils and am going to stick some Spider Silk in there to see how well it works with some organic ... cotton.

This is what im working on here today

I have taken the gold pin from the stock coil and will be using it because it not only has a larger hole, but...its gold plated...

Here we goo

 

[Kwtony]

If you still have the stock coil take out the pin and replace...look at the difference between the two....I almost collapsed a lung with that thing

Okay was winding a larger coil and that doesn't fit so i wound a smaller coil right next to it, to show which works best on this one....you want the one on the left. A teeny bit bigger then stock CLR heads.

I use a razor blade to help with the spacing on these coils. It always perfect and the sharp edge really helps space the coils apart.

 

[Kwtony]

NOTE : I only pulse the TI wire for no longer then .5 seconds at a time, just to ensure that I don't have ay places that are touching and that I have proper in-out glow...but i never let it glow, just barely red, as soon as i can see the color change i stop. I will brush the coil with a pipe cleaner to ensure any dust or debris may be gone. that helps me get it in the coil too. NEVER had residue, but I clean no matter what.

A clean vape is a happy vape

 

[Kwtony]

I modify my clippers on one side of the cutter to be flat.use another clippers file ..this way I can pull the wire to tighten it AND be able to clip with the same tool....work smarter not harder...

Same width as stock coil means it should work well without clearance issues.

Turns out my coil is just a teeny bit smaller then the stock one. Instead of doing it all over again with the right tool, (im feelin lazy) I over-wound the coil 1/2 wrap then unwound it on the screw driver and it opened it up just perfectly

 

[Kwtony]

I cut my cotton in strips and box it so i have them ready to grab and go!

 

[Kwtony]

Started wicking coil

Got it cut

Realized its easier to FULLY install the coil and get it seated first then wick...mess ups along the way are important to document....

 

[Kwtony]

Sleeper coil!!

Hey turns out I can wrap a coil wasn't easy but didn't take more then 30 seconds,

 

[Kwtony]

What a fun night !!

CHOOOO CHOOOOOOOOOOOOOOOOOOO!!!!

 

[Kwtony]

While I was making this post, i had my white box charging on the computer. I use these retractable cords so i can just grab them and puff, then put it all back nice and clean!! LOVE

 

[AndriaD]

I just got an Evic-VT myself, and so far I really like it!

At the time, I didn't have my titanium wire yet, so I just started it up in vw mode to make sure everything worked right. That 30w burst when you first press the fire btn is definitely not a good thing for a tight-draw atty I usually run at 9w!

But I finally got my 28ga Ti1 yesterday, and last night worked up the courage to build the coil and get it all set up. I was so nervous about this new material, I took a pic so my fellow modwompers could have a look and see if it looked right. It did, and it vapes pretty well. If someone tells you you can't tootle puff with a TC mod, tell 'em they need to learn a bit more. 380F, 35w, outstanding tootle puff!

I'm sure I'll be trying different builds, maybe even get some 26ga and try that. It's fun to have a new thing to play with! I'd love to find a white RDA that would suit my tootle puffing style, but so far, no joy.

Andria

 

[USMCotaku]

Ahem.... Glad I sold you on the idea....ahem
Sent with one hand, the other is busy vaping.

 

[Kwtony]

Tooooooooootles!!! Anyone that has ever told me I couldn't do something was proven wrong about 9 times over. Not because I wanna be a meanie head, but because a wise man once told me "whether you can or you cant, you are probably right"

 

[AndriaD]

Ahem.... Glad I sold you on the idea....ahem
Sent with one hand, the other is busy vaping.

Me too! When you mentioned that about how helpful it was with your kayfun that has no clear tank, it really caught my attention, because that's JUST what I need for these Achilles, my new favorites! Earlier I started noticing that although it was still making vapor, the *taste* had subtly changed, not as "saturated" as it is normally in the Achilles. So I checked it, and sure enough, although the wicks were still mostly wet, the well was dry -- exactly at the right time.

Andria

 

[AndriaD]

Tooooooooootles!!! Anyone that has ever told me I couldn't do something was proven wrong about 9 times over. Not because I wanna be a meanie head, but because a wise man once told me "whether you can or you cant, you are probably right"

My violin teacher always used to say "Can't never could, because Can't didn't even try!" By the time my son was about 13, all I had to say was 'can't never could...' and he'd come right back with 'because can't didn't even try.'

Andria