Krimson Kustoms, 3.7v, 5, Variable Voltage and Evercool. Quality, Look, Great Price.

[JamesW]

Krimson Kustoms now offering a full line that's updated as of 10-13-2011:

3.7v Box mod:
- 510 connection
- 2xAA battery case
- Blue 3.7v
- Green 3.7v with brass beauty ring
- Purple 3.7v (Paint Extra)

3.7v Bottomfeeder Box:
- 510 connection
- 2xAA Battery case
- Clear 3.7v Bottomfeeder
- Video of the Newer version.

Evercool Box mod:
- 510 connection
- 3xAA battery case
- Sister Evercools
- Black on Black Evercool
- Green on Green Evercool
- Red Evercool
- New Blue on Blue Evercool
- Purple Evercool (Paint Extra)
- Blue Evercool
- Evercool Brothers
- White Evercool with Black button/knob

Evercool 14500 with Display "Little Man":
- 510 connection
- 3xAA Battery case
- LCD Display
- Red Little Man small dial
- Green Little Man
- Black Little Man

Evercool 14500 with Bottomfeeder:
- 510 connection
- 4xAA Battery Case
- 14500 Evercool Bottomfeeder
- Purple 14500 Bottomfeeder (Paint Job Extra)
- 14500 Bottomfeeder w Display (Display Extra)

Evercool 18650:
- 510 connection
- 4x2x1 Case
- Blue Devil
- 18650 White enclosure w/ gold (Accents extra)

Evercool 18650 with Display:
- 510 connection
- 4.4x2.4x1.2 Case
- 18650 Blue case w display.
- 18650 Clear Case display and recessed well (Recessed Well Extra)

Evercool 18650 bottomfeeder:
- 510 connection
- 4.4x2.4x1.2 Case
- 18650 Bottomfeeder with display(display is extra.)

I offer a fairly large variety of beauty rings, drip cups, and wells: Beauty Rings, Dripwells, Drip cups.

All of the battery cases are available in blue, green, red, clear, solid white or solid black. All of the enclosures are normally available in clear, red, blue, grey, or black(some special size cases may need to be ordered or unavailable in certain colors).

Not all mods are created equal nor do they all fall under the same price. All mod prices are base and depend mainly on how much customization is done beyond normal. If you need further details for pricing and pictures please PM me and I will do my best to get back with you faster.


Clear enclosure Evercool with Display
Black 4xAA Evercool W/ Display
14500 Bottomfeeder w/ Display in 4xAA black
14500 in clear enclosure
14500 Evercool w display 4xAA
Chameleon Paint
Krescendo in Red

website: Home - Krimson Kustoms
James

 

[thughes]

This may be a silly question. But what is the difference between the evercool and non evercool vari volt? I guess the question is what is evercool? Lol. Also will your vari volt boxes push dual coils without shutting off? Thanks in advance! They look really nice and good luck with your new business!

 

[JamesW]

Actually the idea behind the "evercool" type mod is that it uses a Switching regulator instead of a Linear. I could get technical but it's easier to put it like this: A linear regulator takes all of the current the batteries offer and anything it doesn't send to the atomizer it dissipates as heat, this makes the mod hot to the touch and burns battery life. Evercool instead uses a Switching regulator that it takes smaller chunks of energy and only provides the necessary current, saving battery life and not creating heat.

So Evercool style mods don't get hot(near the chip) and they have a longer battery life as they are a lot more efficient.

The variable voltage chips I use actually do push the dual coils without shutting down, I haven't tested the Evercool but as it has the same amperage out and I use the same 3 amp buttons it should as well with no issue.

Thanks for stopping by.

Devil

 

[JamesW]

A quick update, I've had a few people ask about the beauty ring. It's a small cap cup, usually only catches a drop or two but I mainly like it because it does add class to the mod without removing it's ability to have sometime like a tank used on it.



Keep the questions coming, very helpful information.

Devil

 

[36tinybells]

Those are nice! Good prices too. I'm set for now, but good to know you're around for friends!

 

[JamesW]

Thanks for stopping by, always appreciate a look and a comment.

Devil

 

[DavidTop]

I bought a vv from James a few weeks ago. Great output and construction. This was before he decided to start his own line. I would have gone for the evercool if I had known it would be available, c'est la vie. Mine came through the for sale ads.

 

[thughes]

How do you adjust the voltage on your vari volts? Is it a thumb wheel? Thanks in advance!

 

[DavidTop]

You use a small screwdriver on the pot. The pot itself is recessed in the box, accessed through a small hole drilled in the box.

 

[fenderbc]

The evercool uses 2xAA case. So, I'm assuming it will take one 14500 batt? If yes, can you comment on batt life around 4.2 to 4.5V usage?

 

[JamesW]

Yes, a small screwdriver can adjust the voltage, I can either make it flush with the surface or recessed depending on how people wish the mod to look.

Devil

 

[JamesW]

Sorry about that Fender, that was a mistake on my part in the writing of the thread. The Evercools I make are in a 3xAA case and they use 2 14500 batteries. Here is a few pictures of what they look like:

ImageShack(TM) slideshow

Devil

 

[JamesW]

I do credit bigblue for the name and the design is similar only not the exact same chip. However, he already stated once in his post his idea was open source. I do thank him for all of his amazing work in furthering modding just as with breakthru.

James

 

[DavidTop]

PM sent - decided I have to have an evercool

 

[Amajn]

Ah, so you you trade off his Evercool name, yet use a different, cheaper chip I presume.

Seems you could at least credit BigBlue for his design, the regulator he found and his Evercool name.

Above quotes should read as the following,

Ah, so you know i have nothing better to do right now So i will presume that blah blah blah and also blah blah

Seems you could at least credit Everyone in the vaping world for everyones design, Also blah blah and blah and wah wahw wahhhhh waaaahhhh

Get over it Willyb go cry about this somewhere else no one cares

 

[JamesW]

I am actually using a very similar chip that has a PWM type circuit in it that hopefully elongates battery life. If anything I truly hope for a better mod for all my customers to enjoy. I'm very sorry for any animosity you've perceived but I would also ask you not to derail my thread please.

Amajn, thanks for stopping in and looking around, it's always good to see new faces in the thread.

Devil

 

[JamesW]

Small thumb-wheel style attachable for finger adjustment of voltage in the works.

Devil

 

[JamesW]

If you have an issue with Amajn, please take it to a different place. Or are you referring to me with your comment?

Devil

 

[JamesW]

Someone asked if the clear cases turn out well and how well the LED fires up a clear case. So I made one and it turned out amazing, I used a green LED as you can see, but it fills the case really well. Reaches to the other side of the case.

ImageShack(TM) slideshow

Devil

 

[JamesW]

At the behest of a customer I tried my hand at the 3.7v bottomfeeder that folks seem to like. As it turns out...not as simple as you'd think to make it look good.

ImageShack(TM) slideshow

Devil