Polycarbonate tank Q

Discussion in 'Tank Mods' started by Ropav, Jun 28, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Ropav

    Ropav Senior Member Verified Member ECF Veteran

    May 11, 2013
    The moon
    So i just got a kayfun mini and sticker, and id like to be able to use a 16mm mod on the sticker with the poly tank. But it does not fit.
    Is there any way to warp or make an indentation on the tank? Mybe a heat gun or a torch? Idk

    anyone have any ideas? Or try anything like this?
  2. desk1%

    desk1% Senior Member Verified Member ECF Veteran

    Mar 16, 2012
    Laughlin, NV
  3. Clay1969

    Clay1969 Full Member

    Feb 8, 2014
    Hendersonville, Tn, USA
    The first thing I would do personally, is see what all can be done with the material...i.e. like watch videos or read material on poly... etc. I don't know if it's possible to modify the tank the way you describe, but from my experience with welding/heating materials, I would imagine heating the tank would certainly change the aesthetics and possibly the properties of the tank (like make it really brittle for example.) Let us know what you find out. In the absence of material to research on the internet, you could go get some cheap tanks and try to mod them the way you describe.

    On another note, if you do heat the tank and it flows good enough to make a dent in it, it could change the dimensions of the threads making it worthless so you might have better luck modding it while its all screwed together.

    Good Luck!
: kayfun
Thread Status:
Not open for further replies.

Share This Page